Jörg Franke

Prof. Dr.-Ing. Jörg Franke

Leitung

Department of Mechanical Engineering
Institute for Factory Automation and Production Systems (FAPS, Prof. Franke)

Raum 0.036
Egerlandstr. 7
91058 Erlangen

Office hours

aktuelle Termine für Sprechstunden hängen am Schwarzen Brett aus.

Publications

Bründl, P., Scheffler, B., Straub, C., Nguyen, H.G., Stoidner, M., & Franke, J. (2025). Geometric Deep Learning as an Enabler for Data Consistency and Interoperability in Manufacturing. (Unpublished, Submitted).

Ankenbrand, M., Panusch, D., Piechulek, N., Gold, G., Helmreich, K., & Franke, J. (2024). Investigating Laser Direct Structuring and Aerosol-Jet for Additively Manufactured Helix Antennas. In 2024 International Conference on Electronics Packaging, ICEP 2024 (pp. 127-128). Toyama, JPN: Institute of Electrical and Electronics Engineers Inc..
Baader, M., Hahn, R., Franke, J., Kampker, A., Born, H., Hartmann, S.,... Pecha, U. (2024). The Production Process Chain of Axial Flux Motors: A Comparative Study. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE: New York City: IEEE.
Barth, M., Gutwald, B., Russwurm, E., Lavery, M., Schwanninger, R., März, M., & Franke, J. (2024). Holistic Concept for Simulation-based Planning and Design of Hybrid AC/DC Energy Grids for Production Systems. Simulation Notes Europe, 34, 61-70. https://doi.org/10.11128/sne.34.tn.10682
Bartz, M., Halmos, F., Jüttner, M., Ankenbrand, M., Häusler, F., Franke, J., & Wartzack, S. (2024). Use of printed sensors to measure strain in rolling bearings under isolated boundary conditions. Konstruktion, 76(4), 58-59.
Bartz, M., Häußler, F., Halmos, F., Ankenbrand, M., Jüttner, M., Franke, J., & Wartzack, S. (2024). Strain measurement on rolling bearings using sensors applied by aerosol-based deposition. In Proceedings of the Bearing World. Würzburg, DE.
Bartz, M., Jüttner, M., Halmos, F., Uhlich, E., Klein, M., Drumm, P.,... Wartzack, S. (2024). Assessment of the Suitability of Selected Linear Actuators for the Implementation of the Load-Adaptive Biological Principle of Redundant Motion Generation. Biomimetics, 9, 236. https://doi.org/10.3390/biomimetics9040236
Bodendorf, F., Feilner, S., & Franke, J. (2024). How do joint ventures and non-equity strategic alliances impact the complexity of the supply chain and thus supply chain performance? Supply Chain Management-An International Journal, 29(4), 685-705. https://doi.org/10.1108/SCM-04-2023-0168
Bodendorf, F., & Franke, J. (2024). Examining the dynamics of bargaining power in buyer-supplier negotiations: insights from a case study in the German automotive industry. International Journal of Production Research. https://dx.doi.org/10.1080/00207543.2023.2299678
Bodendorf, F., & Franke, J. (2024). Synthesis of activity-based costing and deep learning to support cost management: A case study in the automotive industry. Computers & Industrial Engineering, 196. https://doi.org/10.1016/j.cie.2024.110449
Bodendorf, F., & Franke, J. (2024). The Technological Transformation Process for Dynamic Capabilities in Business Operations. IEEE Transactions on Engineering Management, 71, 3671-3687. https://dx.doi.org/10.1109/TEM.2024.3349478
Bründl, P., Scheck, A., Nguyen, H.G., & Franke, J. (2024). Towards a circular economy for electrical products: A systematic literature review and research agenda for automated recycling. Robotics and Computer-Integrated Manufacturing, 87. https://doi.org/10.1016/j.rcim.2023.102693
Bründl, P., Stoidner, M., Bredthauer, J., Nguyen, H.G., Baechler, A., & Franke, J. (2024). Unlocking the potential of digitalization and automation: a qualitative and quantitative study of the control cabinet manufacturing industry. Production & Manufacturing Research, 12(1). https://doi.org/10.1080/21693277.2024.2306820
Bründl, P., Stoidner, M., Nguyen, H.G., Abrass, A., & Franke, J. (2024). Optimizing Intralogistics in an Engineer-to-Order Enterprise with Job Shop Production: A Case Study of the Control Cabinet Manufacturing. SAE International Journal of Materials and Manufacturing, 17. https://doi.org/10.4271/05-17-01-0006
Bründl, P., Stoidner, M., Nguyen, H.G., Abrass, A., & Franke, J. (2024). Traceability in Engineer-to-Order Manufacturing SMEs. In 2024 32nd Mediterranean Conference on Control and Automation (MED). Chania, GR: New York City: IEEE.
Fröhlich, J., Piechulek, N., Nguyen, H.G., Franke, J., & Jurgenhake, C. (2024). Reliable and Automated Connection of Printed Electronics to the Aviation Electrical System. In 2024 Pan Pacific Strategic Electronics Symposium, Pan Pacific 2024. Kona, Big Island, HI, USA: Institute of Electrical and Electronics Engineers Inc..
Furman, A., Rupprecht, N., Seßner, J., & Franke, J. (2024). 3D Image Reconstruction Using Force-Controlled Robot-Assisted Ultrasound Scanning. In 2024 46th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (pp. 1-5). Orlando, US: New York City: IEEE.
Gugel, L., Mashhouri, S., Franke, J., & Martin, S. (2024). Pre-crosslinking Dependent Layer Adhesion in Additive Manufacturing of RTV-2 Silicone. Procedia CIRP, 130, 53-58. https://doi.org/10.1016/j.procir.2024.10.055
Gutwald, B., Barth, M., Mönius, O., Zeilmann, B., & Franke, J. (2024). Power Forecast of Photovoltaic Systems-An Approach for Improving Energy Management of DC-Supplied Production Plants. In Proceedings of the Congress of the German Academic Association for Production Technology (pp. 559-568). Springer Nature.
Gutwald, B., Baumann, N., Funk, F., Reichenstein, T., Albayrak, B., & Franke, J. (2024). Sustainable manufacturing practices: A systematic analysis and guideline for assessing the industrial Product Carbon Footprint. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility, EPTS 2024. Bamberg, DE: Institute of Electrical and Electronics Engineers Inc..
Gutwald, B., Korneev, A., Römer, P., Barth, M., Reichenstein, T., & Franke, J. (2024). Comparative Efficiency Analysis in Recuperative Electrical Drives: A Study of LVDC vs. LVAC-Power Supply. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility, EPTS 2024. Bamberg, DE: Institute of Electrical and Electronics Engineers Inc..
Gutwald, B., Korneev, A., Römer, P., Barth, M., Reichenstein, T., & Franke, J. (2024). Comparative Efficiency Analysis in Recuperative Electrical Drives: A Study of LVDC vs. LVAC-Protection Components and Grid Integration. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE: Institute of Electrical and Electronics Engineers, Inc..
Gutwald, B., Lehmann, R., Barth, M., Reichenstein, T., & Franke, J. (2024). Bi-directional DC Charging Stations for EVs on renewable-powered LVDC Grids: Design, Sizing, Control and Testing. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility, EPTS 2024. Bamberg, DEU: Institute of Electrical and Electronics Engineers Inc..
Gutwald, B., Reichenstein, T., Barth, M., & Franke, J. (2024). Measurement Technology in Industrial Low Voltage DC grids-Requirements and Selection Procedure. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility, EPTS 2024. Bamberg, DEU: Institute of Electrical and Electronics Engineers Inc..
Hahn, R., Wieprecht, N., Ihne, T., Kühl, A., & Franke, J. (2024). Approach For Optimized Dismantling Strategies And Design For Recycling Of Electric Traction Drives. In Proceedings of the 6th Conference on Production Systems and Logistics. Hannover: punlish-ing.
Hecht, C., Ockel, M., Stoll, T., & Franke, J. (2024). Fabrication of metal-ceramic substrates by laser powder bed fusion using a high-power green laser and high temperature preheating. In Proceedings Volume 12876, Laser 3D Manufacturing XI. San Francisco, US: SPIE.
Ihne, T., Hahn, R., Kühl, A., & Franke, J. (2024). Approaches For The Physical Sorting Of Soft And Hard Magnetic Material Mixtures In The Context Of Rare Earth Recycling. In D Herberger, M Hübner (Eds.), Proceedings of the CPSL 2024.. Hannover, DE.
Ihne, T., Hahn, R., Wieprecht, N., Franke, J., & Kühl, A. (2024). Recycling Concept for Electric Vehicle Drives in the Context of Rare Earth Recovery. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE.
Kalenberg, M., Hofmann, C., Martin, S., & Franke, J. (2024). Human Comfort Factors in People Navigation: Literature Review, Taxonomy and Framework. In Joaquim Filipe, Juha Röning (Eds.), Robotics, Computer Vision and Intelligent Systems. 4th International Conference, ROBOVIS 2024, Rome, Italy, February 25–27, 2024, Proceedings (pp. 225-243). Rom, IT: Cham: Springer.
Kampker, A., Born, H., Hartmann, S., Drexler, D., Franke, J., Baader, M.,... Pecha, U. (2024). Comprehensive Review and Systemization of the Product Features of Axial Flux Machines. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE: New York City: IEEE.
Kneidl, M., Kneidl, M., Gömmel, D., Jordan, S., Masuch, M., Kühl, A., & Franke, J. (2024). Thermal Analysis of the Encapsulation of Resonance Circuit Modules for the Paving Into Electric Road Systems. In Proceedings of 2024 IEEE Wireless Power Technology Conference and Expo, WPTCE 2024 (pp. 159-164). Kyoto, JP: Institute of Electrical and Electronics Engineers, Inc..
Kunz, D., Maisel, T., Kunze, A., & Franke, J. (2024). Increasing Resilience in Production Networks: A Practical Approach Based on Scenario Planning and Simulation-Based Capacity Analysis. In Floriano De Rango, Frank Werner, Gerd Wagner (Eds.), Proceedings of the International Conference on Simulation and Modeling Methodologies, Technologies and Applications (pp. 158-169). Dijon, FRA: Science and Technology Publications, Lda.
Landesberger, M., Kedilioglu, O., Wang, L., Gan, W., Rebelo Kornmeier, J., Reitelshöfer, S.,... Hofmann, M. (2024). High-Precision Visual Servoing for the Neutron Diffractometer STRESS-SPEC at MLZ. Sensors, 24(9). https://doi.org/10.3390/s24092703
Landesberger , M., Kedilioglu, O., Wang , L., Gan , W., Kornmeier , J.R., Reitelshöfer, S.,... Hofmann , M. (2024). High-Precision Visual Servoing for the Neutron Diffractometer STRESS-SPEC at MLZ. Sensors, 24(9). https://doi.org/10.3390/s24092703
Lüer, L., Peters, I.M., Smith, A.-S., Dorschky, E., Eskofier, B., Liers-Bergmann, F.,... Brabec, C. (2024). A digital twin to overcome long-time challenges in photovoltaics. Joule, 8, 1-17. https://doi.org/10.1016/j.joule.2023.12.010
Mahr, F., Schmidt, K., Thielen, N., Sindel, T., & Franke, J. (2024). Optimizing Machine Learning Performance via Dataset Generation for X-ray Image Classification. In 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Catania, IT: New York City: IEEE.
Martin, S., Gugel, L., Schedel, S., Reitelshöfer, S., & Franke, J. (2024). Printed stretchable dielectric sensor grids for pressure monitoring in orthopedics. In John D. Madden (Eds.), Proceedings of SPIE - The International Society for Optical Engineering. Long Beach, CA, US: SPIE.
May, C., Suchy, L., Franke, J., & Reitelshöfer, S. (2024). Towards Imaginative Robots: A Generative Pipeline for Simulated Environments. In Langbeiträge ASIM SST (pp. 159-166). München, DE.
Ockel, M., Borchers, A., Fröhlich, J., Petersen, M., Paschen, T., Christiansen, S., & Franke, J. (2024). Atmospheric Plasma Spraying for Copper Coating of Ceramic Solid Electrolytes for Anode-Free Solid-State Batteries with Increased Interfacial Contact. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE: Institute of Electrical and Electronics Engineers, Inc..
Ockel, M., Funk, F., Janisch, L., & Franke, J. (2024). Evaluation of the Cold Atmospheric Plasma Metallization of Bare Dies with Copper Through Life Cycle Assessment. In Thomas Bauernhansl, Alexander Verl, Mathias Liewald, Hans-Christian Möhring (Eds.), Production at the Leading Edge of Technology. Proceedings of the 13th Congress of the German Academic Association for Production Technology (WGP), Freudenstadt, November 2023. (pp. 417-427). Cham: Springer Nature Switzerland.
Ockel, M., Gökçen, A., Ottinger, B., Petersen, M., Voigt, C., & Franke, J. (2024). Cold Atmospheric Plasma Metallization of Power Semiconductor Bare Dies with CuSn Pseudo-Alloys for Diffusion Soldering. In ITSC 2024 International Thermal Spray Conference and Exposition. Conference Proceedings and Poster Sessions (pp. 17-26). Mailand, IT: Düsseldorf: DVS Media GmbH.
Ockel, M., Meier, S., Stelter, O., Thielen, N., Bründl, P., & Franke, J. (2024). Implementation of a Camera System for the Application of Artificial Intelligence in Monitoring the Cold Atmospheric Plasma Spray Process. In 2024 32nd Mediterranean Conference on Control and Automation (MED). Chania, GR: New York City: IEEE.
Ottinger, B., Holverscheid, J., König, S., Brunner, A., Müller, L., Goth, C., & Franke, J. (2024). Investigations Selected Influencing of Process Factors for Transient Liquid Phase Soldering (TLPS) as a Die-attach Method for Automotive Power Modules. Advancing Microelectronics, 51(2), 6-10.
Rachinger, B., Seidel, R., Meier, S., & Franke, J. (2024). Optimierung der Prozessparameter beim Selektivwellenlöten mit Hilfe von Offline Reinforcement Learning. In GMM-Fb. 107: EBL 2024 – Elektronische Baugruppen und Leiterplatten. Fellbach, DE.
Raffin, T., Baader, M., Masuch, M., Alikarrar, M., & Franke, J. (2024). Quality Monitoring of Hairpin Joints Using Optical Coherence Tomography and Machine Learning. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE: Institute of Electrical and Electronics Engineers, Inc..
Reichenstein, T., Reich, C.S., Hoffmann, K., & Franke, J. (2024). From connectivity via intelligence toward sustainability? Maturity of shopfloor automation technology in the manufacturing industry. Procedia CIRP, 128, 436-441. https://doi.org/10.1016/j.procir.2024.03.024
Reichenstein, T., Scheck, A., Franke, J., & Meiners, M. (2024). Qualitative in-situ-Stromflussmessung der Schweißzone/Qualitative in-situ current flow measurement of the weld zone. wt Werkstattstechnik - Online, 114, 509-514. https://doi.org/10.37544/1436-4980-2024-09-53
Scheck, A., Hofmann, B., Nguyen, H.G., & Franke, J. (2024). A multi-perspective deep learning approach for optical inspection of crimp connections. In Shoou-Jinn Chang, Sheng-Joue Young, Artde Donald Kin-Tak Lam, Liang-Wen Ji, Stephen D. Prior (Eds.), Proceedings of the 2024 10th International Conference on Applied System Innovation, ICASI 2024 (pp. 235-237). Kyoto, JPN: Institute of Electrical and Electronics Engineers Inc..
Scheffler, B., Bründl, P., Nguyen, H.G., Stoidner, M., & Franke, J. (2024). A Dataset of Electrical Components for Mesh Segmentation and Computational Geometry Research. Scientific Data, 11. https://doi.org/10.1038/s41597-024-03155-w
Schäfer, A., Pecha, U., Parspour, N., Kampker, A., Born, H., Hartmann, S.,... Hahn, R. (2024). A Review of Electromagnetic Simulation and Modelling Approaches for the Research on Axial Flux Synchronous Machines. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE: New York City: IEEE.
Sindel, T., Thielen, N., Mahr, F., Reichenstein, T., Erdogan, H., & Franke, J. (2024). Data-Driven Bed of Nails Wear Analysis for the in-Circuit-Testing of Electronic Modules. In 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) (pp. 1-6). Padova, IT: New York City: IEEE.
Sippel, M., Tan, Y.F., Schmidt, R., Botazzoli, P., Sprenger, M., & Franke, J. (2024). Testing and simulation of lifetime for wire bond interconnections with varying bond foot angle. Microelectronics Reliability, 155. https://doi.org/10.1016/j.microrel.2024.115348
Sprenger, M., Forndran, F., Öztürk, B., Sippel, M., Ockel, M., Goth, C., & Franke, J. (2024). Influence of hard encapsulation onto reliability of soldered die-attach in power modules. In ETG-Fachbericht (pp. 411-415). Dusseldorf, DEU: VDE Verlag GmbH.
Stoidner, M., Bründl, P., Matthes, T., Nguyen, H.G., Abrass, A., & Franke, J. (2024). Designing Manual Workplace Systems in Engineer-to-Order Enterprises to Improve Productivity: A Kano Analysis. SAE International Journal of Materials and Manufacturing, 17(1). https://doi.org/10.4271/05-17-01-0007
Stoidner, M., Bründl, P., Nguyen, H.G., Abrass, A., & Franke, J. (2024). Towards a Reconfigurable Manufacturing System for Control Cabinet Manufacturing: A Systematic Literature Review and Research Agenda. In 2024 32nd Mediterranean Conference on Control and Automation (MED). Chania, GR.
Streloke, L., & Franke, J. (2024). Electrifying the Road: Disruptive Shifts in Automotive Value Creation. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility, EPTS 2024. Bamberg, DE: Institute of Electrical and Electronics Engineers Inc..
Thielen, N., Rachinger, B., Schröder, F., Preitschaft, A., Meier, S., Seidel, R.,... Franke, J. (2024). Comparative Study on Different Methods to Generate Synthetic Data for the Classification of THT Solder Joints. In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). Bamberg, DE: New York City: IEEE.
Utsch, D., Sippel, M., Voigt, C., Häußler, F., & Franke, J. (2024). Assessment and improvement of adhesion of printed silver-based inks on alumina produced by fused filament fabrication. Power Electronic Devices and Components, 8. https://doi.org/10.1016/j.pedc.2024.100067
Vogel, A., Baader, M., Wirthmann, F., Kühl, A., Franke, J., & Kassel, F. (2024). Design, Construction, and Laser Welding of a Contact Ring for Automated and Reliable Coil Connection for Wound Power-Dense Flat Wired Stators. In 2024 IEEE 69th Holm Conference on Electrical Contacts (HOLM) (pp. 1-10). Annapolis, US: New York City: IEEE.

Alzoubi, K., Hensel, A., Häußler, F., Ottinger, B., Sippel, M., & Franke, J. (2023). Process-Factor Optimization of Small-Area Sintered Interconnects for Power Electronics Applications. Journal of Electronic Packaging, 145. https://doi.org/10.1115/1.4056992
Ankenbrand, M., Panusch, D., Utsch, D., Banea, K., Ehrngruber, M., Gold, G.,... Franke, J. (2023). Generation of RF Structures on Additively Manufactured Substrates by Printed Electronics and Laser Structuring. In Proceedings of the SMTA Pan Pacific Microelectronics Symposium 2023 (pp. 115-120). Kauai.
Barth, M., Gutwald, B., Russwurm, E., Franke, J., Lavery, M., Schwanninger, R., & März, M. (2023). Simulation-based planning and design of hybrid AC/DC energy grids for production systems: a holistic approach. In Sören Bergmann, Niclas Feldkamp, Rainer Souren, Steffen Straßburger (Eds.), 20. ASIM Fachtagung Simulation in Produktion und Logistik 2023 (pp. 31--40). Ilmenau, DE: Ilmenau: Universitätsverlag Ilmenau.
Barth, M., Russwurm, E., Gutwald, B., Kunz, D., Reichenstein, T., & Franke, J. (2023). Modeling and Simulation Techniques for Energy Behavior in Production Systems: A Review and Systematic Taxonomy. In 2023 IEEE 2nd Industrial Electronics Society Annual On-Line Conference (ONCON). IEEE.
Bartz, M., Häußler, F., Halmos, F., Ankenbrand, M., Jüttner, M., Roudenko, J.,... Wartzack, S. (2023). Use of Printed Sensors to Measure Strain in Rolling Bearings under Isolated Boundary Conditions. Lubricants, 11, 424. https://doi.org/10.3390/lubricants11100424
Basu, R., Siah, K.S., Distler, A., Häußler, F., Franke, J., Brabec, C., & Egelhaaf, H.-J. (2023). Aerosol-Jet-Printed Encapsulation of Organic Photovoltaics. Advanced Engineering Materials. https://doi.org/10.1002/adem.202300322
Benke, E., Gschaidmeier, S., Gentsch, O., Deittert, H., Martin, S., Preis, A., & Franke, J. (2023). Enhancing Men’s Health Management at Home with an Easy-to-Use, App-Connected Prostate Self-Testing Device. In Proceedings of the 16th International Joint Conference on Biomedical Engineering Systems and Technologies BIOSTEC (pp. 182 - 189). Lisbon, PT: SCITEPRESS – Science and Technology Publications.
Blank, A., Zikeli, L., Reitelshöfer, S., Karlidag, E., & Franke, J. (2023). Augmented Virtuality Input Demonstration Refinement Improving Hybrid Manipulation Learning for Bin Picking. In Kyoung-Yun Kim, Leslie Monplaisir, Jeremy Rickli (Eds.), Lecture Notes in Mechanical Engineering (pp. 332-341). Detroit, MI, US: Springer Science and Business Media Deutschland GmbH.
Bodendorf, F., Dentler, S., & Franke, J. (2023). Digitally enabled supply chain integration through business and process analytics. Industrial Marketing Management, 114, 14-31. https://doi.org/10.1016/j.indmarman.2023.07.005
Bodendorf, F., Sauter, M., & Franke, J. (2023). A mixed methods approach to analyze and predict supply disruptions by combining causal inference and deep learning. International Journal of Production Economics, 256. https://doi.org/10.1016/j.ijpe.2022.108708
Bründl, P., Scheffler, B., Stoidner, M., Nguyen, H.G., Baechler, A., Abrass, A., & Franke, J. (2023). Semantic part segmentation of spatial features via geometric deep learning for automated control cabinet assembly. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-023-02267-1
Bründl, P., Stoidner, M., Nguyen, H.G., Baechler, A., & Franke, J. (2023). Challenges and Opportunities of Software-Based Production Planning and Control for Engineer-to-Order Manufacturing. In Alfnes, E., Romsdal, A., Strandhagen, J.O., von Cieminski, G., Romero, D. (Eds.), Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures. APMS 2023 (pp. 67-79). Trondheim, NO: Cham: Springer.
Bründl, P., Stoidner, M., Nguyen, H.G., Baechler, A., & Franke, J. (2023). Digitalization and Adoption of Industry 4.0 in Engineer-to-order Small and Medium-sized Manufacturing Companies: An Empirical Analysis. In 2023 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Singapur, SG: IEEE.
Campbell, J., Taghavi, A., Preis, A., Martin, S., Skirtach, A.G., Franke, J.,... Vikulina, A. (2023). Spontaneous shrinkage drives macromolecule encapsulation into layer-by-layer assembled biopolymer microgels. Journal of Colloid and Interface Science, 635, 12-22. https://doi.org/10.1016/j.jcis.2022.12.115
Franke, J., Wasserscheid, P., Ihne, T., Lamp, P., Guldner, J., & Zipse, O. (2023). The Power of Technological Innovation. In Oliver Zipse, Joachim Hornegger, Thomas Becker, Thomas Becker, Michael Bengsch, Irene Feige, Markus Schober (Eds.), Road to Net Zero. (pp. 215-264). Cham: Springer.
Gugel, L., Martin, S., Preis, A., & Franke, J. (2023). Thermoelectric Printhead Cooler for a Stable Process and Curing Control in RTV-2 Silicone Additive Manufacturing by Direct Ink Writing. Procedia CIRP, 120, 974-979. https://doi.org/10.1016/j.procir.2023.09.110
Halmos, F., Jüttner, M., Bartz, M., Ankenbrand, M., Häusler, F., Franke, J., & Wartzack, S. (2023). Einsatz von gedruckten Sensoren zur Messung der Dehnung von Wälzlagern unter isolierten Randbedingungen. WiGeP News, 2/2023.
Hecht, C., Häußler, F., Schadow, E., Stoll, T., Sprenger, M., & Franke, J. (2023). Additive metallization of alumina with copper-titanium powder blends for power electronic applications. Advancing Microelectronics, 2023(EMPC), 129-134. https://doi.org/10.4071/001c.94698
Hecht, C., Schadow, E., Sprenger, M., Häußler, F., Stoll, T., & Franke, J. (2023). Additive Metallization of Alumina with Copper-Titanium Powder Blends for Power Electronic Applications. In IMAPSource Proceedings 2023 (EMPC). Hinxton, GB: Institute of Electrical and Electronics Engineers Inc..
Hecht, C., Schüller, D., Utsch, D., Stoll, T., & Franke, J. (2023). Investigations on processing copper-titanium powder blends via PBF-LB/M. In Lasers in Manufacturing..
Hofmann, C., Taliercio, F., Walter, J., Franke, J., & Reitelshöfer, S. (2023). Towards Adaptive Environment Perception and Understanding for Autonomous Mobile Robots. In 2023 IEEE Symposium Sensor Data Fusion and International Conference on Multisensor Fusion and Integration (SDF-MFI). Bonn, DE: New York City: IEEE.
Ihne, T., Hahn, R., Wieprecht, N., Franke, J., & Kühl, A. (2023). Approach for Advanced Mechanical Recycling Strategies of Rare Earth Magnets Applied in Traction Drives. In Thomas Bauernhansl, Alexander Verl, Mathias Liewald, Hans-Christian Möhring (Eds.), Production at the Leading Edge of Technology (pp. 458-468). Freudenstadt, DE: Cham: Springer.
Ihne, T., Wieprecht, N., Hahn, R., Franke, J., & Kühl, A. (2023). Analysis of induction-based thermal demagnetization of a permanent magnet rotor in the context of recycling. In 2023 13th International Electric Drives Production Conference. Regensburg, DE: IEEE.
Kalenberg, M., Lieret, M., Hofmann, C., & Franke, J. (2023). A Multimodal A∗ Algorithm to Solve the Two-Dimensional Optimization Problem of Accompanying a Person for an Intelligent Wheelchair. In Proceedings of the 45th Annual International Conference of the IEEE Engineering in Medicine and Biology Conference, EMBC 2023. Institute of Electrical and Electronics Engineers Inc..
Kambarov, I., Inoyatkhodjaev, J., Kunz, D., Brossog, M., & Franke, J. (2023). From Human to Robot Interaction towards Human to Robot Communication in Assembly Systems. In Mehmet Ozaslan (Eds.), Eurasia Proceedings of Science, Technology, Engineering and Mathematics (pp. 241-252). Budapest, HUN: ISRES Publishing.
Kedilioglu, O., Nikol, M., Walter, J., & Franke, J. (2023). Correlation Analysis of Factors Influencing the Motion Planning Accuracy of Articulated Robots. In Proceedings of the 2023 9th International Conference on Automation, Robotics and Applications (ICARA). Abu Dhabi, AE.
Kneidl, M., Fuß, T., Weigelt, M., Masuch, M., Kühl, A., & Franke, J. (2023). Analysis of Production Influences on the Transmission Efficiency of Wireless Power Transfer Systems. In 2023 IEEE Wireless Power Technology Conference and Expo, WPTCE 2023 - Proceedings. San Diego, CA, USA: Institute of Electrical and Electronics Engineers Inc..
Kunz, D., Barth, M., Franke, J., & Weber, J. (2023). Virtual Commissioning and the use of Extended Reality and Automated Testing: a survey of industry. In Proceedings of the 20. ASIM Fachtagung Simulation in Produktion und Logistik 2023. Ilmenau, DE.
Lutz, B., Janisch, L., Kißkalt, D., Regulin, D., & Franke, J. (2023). Interactive Image Segmentation Using Superpixels and Deep Metric Learning for Tool Condition Monitoring. In Roberto Teti, Doriana D'Addona (Eds.), Procedia CIRP (pp. 459-464). Naples, ITA: Elsevier B.V..
Mahr, A., Mathea, P., Vogel, A., Morello, A., Franke, J., & Kühl, A. (2023). Robotic based Assembly of insulating Sleeves onto Winding Coil Ends of Electric Drive Stators. In Proceedings of the 13th International Electric Drives Production Conference (E|DPC). Regensburg, DE.
Martin, S., Reitelshöfer, S., & Franke, J. (2023). Morphologically intelligent dielectric elastomer sensors based on micro-structured electrodes as resistive strain elements. In Herbert R. Shea (Eds.), Proceedings of SPIE - The International Society for Optical Engineering. Long Beach, CA, USA: SPIE.
Mayr, A., Scheffler, F., Fuder, R., Raffin, T., Kißkalt, D., & Franke, J. (2023). Data-driven quality monitoring of needle winding processes in electric motor production using machine learning techniques. In Roberto Teti, Doriana D'Addona (Eds.), Procedia CIRP (pp. 873-878). Naples, ITA: Elsevier B.V..
Meier, S., Klarmann, S., Thielen, N., Pfefferer, C., Kuhn, M., & Franke, J. (2023). A process model for systematically setting up the data basis for data-driven projects in manufacturing. Journal of Manufacturing Systems, 71, 1-19. https://doi.org/10.1016/j.jmsy.2023.08.024
Nguyen, H.G., Scheck, A., Hofmann, B., Meiners, M., Neubauer, S., Schäfer, A., & Franke, J. (2023). Ganzheitliche und auf maschinellen Lernverfahren basierende Qualitätsüberwachung. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 118(4), 198-203. https://doi.org/10.1515/zwf-2023-1045
Ockel, M., Janisch, L., Franke, J., Schlichting, J., & Breuer, M. (2023). Enhancing Flexibility in Power Electronics Production: A Study on Robotic Handling of Copper Clips for Laser Bonding. In Proceedings of the 11th International Conference on Control, Mechatronics and Automation, ICCMA 2023 (pp. 259-264). Institute of Electrical and Electronics Engineers Inc..
Ockel, M., Sippel, M., Hecht, C., Janisch, L., & Franke, J. (2023). A Conceptional Study towards Developing a Novel Copper Top-Side Interconnection Process in Power Electronics using Additive Manufacturing.
Ottinger, B., Holverscheid, J., König, S., Brunner, A., Müller, L., Goth, C., & Franke, J. (2023). Investigations of selected influencing process factors for transient liquid phase soldering (TLPS) as die-attach method for automotive power modules. In Proceedings of the International Conference and Exhibition on High Temperature Electronics (HITEC 2023) (pp. 1-5). Albuquerque, US.
Ottinger, B., Mathew, A., König, S., Albrecht, J., Sprenger, M., Müller, L.,... Franke, J. (2023). Improving the reliability of power modules through layered diffusion solder interconnects – Comparative study based on experiments and FE-simulation. Microelectronics Reliability. https://doi.org/10.1016/j.microrel.2023.115097
Preis, A., Grigull, R.-C., Wang, Y., Benke, E., Martin, S., Rieker, R.,... Reitelshöfer, S. (2023). Pinch Valve Approach for a Biofilm Resistant Mechatronic Intraurethral Artificial Urinary Sphincter*. In Proceedings of the 2023 45th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). Sydney, AU: IEEE.
Preis, A., Merkl, C., Miralles, P., Heer, S., Benke, E., Reitelshöfer, S.,... Franke, J. (2023). Towards a Synthetic Tissue Model of the Lower Urinary Tract. In Proceedings of the 16th International Joint Conference on Biomedical Engineering Systems and Technologies BIOSTEC - (Volume 1) (pp. 190-197). Lisbon, PT.
Raffin, T., Mayr, A., Baader, M., Laube, N., Kühl, A., & Franke, J. (2023). Potentials of few-shot learning for quality monitoring in laser welding of hairpin windings. Procedia CIRP, 118, 901-906. https://doi.org/10.1016/j.procir.2023.06.155
Reichenstein, T., Koustas, S.G., Roßner, A., Meiners, M., & Franke, J. (2023). Toward a structured concept for purpose-driven modeling of a digital shadow in manufacturing. Procedia CIRP, 119, 816-821. https://doi.org/10.1016/j.procir.2023.02.167
Rösel, U., Kneidl, M., Franke, J., & Drummer, D. (2023). Improving the integrated fabrication of insulation systems in electric drives by injection molding of thermosets due to processing conditions and slot design. Polymers, 1-20. https://doi.org/10.3390/polym15051165
Schmidt, A., Wieprecht, N., Cosack, A., Janisch, L., Franke, J., & Kühl, A. (2023). Systematic Qualification of Layer Thickness, Roundness and Defects of Screen-printed Magnetic Sheets. In 2023 13th International Electric Drives Production Conference (EDPC). Regensburg, DE: IEEE.
Schmidt, A., Wieprecht, N., Schlichting, J., Denneler, S., Franke, J., & Kühl, A. (2023). Process Development of Screen-Printed Magnetic Sheets for Electric Machines via Statistical Design of Experiments. Metals, 13(11). https://doi.org/10.3390/met13111814
Schmidt, A., Wieprecht, N., Thamm, J., Kühl, A., & Franke, J. (2023). Continuous Improvement of the Screen printing Process of Magnetic Sheets for Electric Machines by Statistical Design of Experiment. In Francisco J. G. Silva; Luís Pinto Ferreira; José Carlos Sá; Maria Teresa Pereira; Carla M.A. Pinto (Eds.), Lecture Notes in Mechanical Engineering (pp. 416-424). Porto, PT: Gewerbestrasse 11, 6330 Cham, Switzerland: Springer.
Schmidt, A., Wieprecht, N., Weinrich, T., Franke, J., & Kühl, A. (2023). Multi-objective parameter optimization for stacking and sintering of screen-printed magnetic sheets. Production Engineering. https://doi.org/10.1007/s11740-023-01245-z
Schmidt, A., Ziegler, M., Franke, J., & Kühl, A. (2023). Development of Magnetic Sheets for CO2 Efficient Electric Drives Using an Additive Manufacturing Approach. In Holger Kohl, Günther Seliger, Franz Dietrich (Eds.), Lecture Notes in Mechanical Engineering (pp. 294-301). Berlin, DE: Springer Science and Business Media Deutschland GmbH.
Schmidt, A., Ziegler, M., Kühl, A., & Franke, J. (2023). Development of Magnetic Sheets for CO2 Efficient Electric Drives Using an Additive Manufacturing Approach. Springer Science and Business Media Deutschland GmbH.
Schrage, T., Schuderer, P., Barth, M., & Franke, J. (2023). Entwicklung und Realisierung einer Modellbibliothek für ein Entscheidungsunterstützungssystem in der Kalksandsteinproduktion. In 20. ASIM Fachtagung Simulation in Produktion und Logistik 2023 (pp. 363 - 372). Ilmenau, DE: Ilmenau: Universitätsverlag Ilmenau.
Seidel, R., Rachinger, B., Thielen, N., Schmidt, K., Meier, S., & Franke, J. (2023). Development and validation of a digital twin framework for SMT manufacturing. Computers in Industry, 145. https://doi.org/10.1016/j.compind.2022.103831
Sippel, M., Tan, Y.F., Schmidt, R., Botazzoli, P., Sprenger, M., & Franke, J. (2023). Influence of the Bond Foot Angle on Active Power Cycling Lifetime of Wire Bonds. In 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023. Graz, AUT: Institute of Electrical and Electronics Engineers Inc..
Sprenger, M., Kramer, M., Tolyschew, E., Steinau, M., Renner, D., Ottinger, B., & Franke, J. (2023). Warpage of transfer-molded automotive power modules - experimental characterization, numerical simulation and optimization. In 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023. Graz, AT: Institute of Electrical and Electronics Engineers Inc..
Stoidner, M., Bründl, P., Nguyen, H.G., Baechler, A., & Franke, J. (2023). Standardizing Process Optimization for Production Processes in the Control Cabinet Industry: A Multiple Case Study. In 2023 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Singapur, SG: IEEE.
Stoidner, M., Bründl, P., Nguyen, H.G., Baechler, A., & Franke, J. (2023). Towards the Digital Factory Twin in Engineer-to-Order Industries: A Focus on Control Cabinet Manufacturing. In Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures. (pp. 80-95).
Stoidner, M., Bründl, P., Nguyen, H.G., Baechler, A., & Franke, J. (2023). Workplace Analysis and Ergonomics in Engineer-to-Order Production Sites: A Study on the Workplace Design of Control Cabinet Manufacturing Enterprises. In 2023 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Singapur, SG: IEEE.
Teske, F., Schubert, J., Fehrle, A., Funk, F., & Franke, J. (2023). Techno-economic analysis of battery storage systems and hydrogen- based storage systems as an alternative to grid expansion in the medium voltage grid in Germany. AIMS Energy, 11(2), 358-401. https://doi.org/10.3934/energy.2023019
Utsch, D., Bründl, P., Franke, J., & Erdogan, H. (2023). Mechanical qualification and microstructural analysis of alumina produced by material extrusion. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 145456. https://doi.org/10.1016/j.msea.2023.145456
Utsch, D., Häußler, F., Sprenger, M., Zirn, J., & Franke, J. (2023). Reliability of Piezojet-Printed Conductive Lines on Alumina Substrates Produced by Fused Filament Fabrication. In 2023 15th International Congress Mechatronic Integration Discourse (MID). Amberg, DE: New York: IEEE.
Utsch, D., Häußler, F., Voigt, C., Sippel, M., & Franke, J. (2023). Optimizing Adhesion of Printed Conductive Lines on Additively Manufactured Ceramics. In Proceedings of the 46th International Spring Seminar on Electronics Technology. Timisoara, RO.
Vogt, J., Martin, S., & Franke, J. (2023). Smartphone-Based Hyperspectral Imaging - Low-Cost Application for Telemedicine. In Bernhard Pfeifer, Günter Schreier, Martin Baumgartner, Dieter Hayn (Eds.), dHealth 2023. (pp. 69-70). IOS Press.
Voigt, C., Petersen, M., Thielen, N., Utsch, D., Häußler, F., Kirchberger, M., & Franke, J. (2023). Analysis of the Suitability of Inkjet-Printed Ag-Particle-Filled Inks for Use in Connections of Fine-Pitch Electrical Components. In 2023 46th International Spring Seminar on Electronics Technology (ISSE) (pp. 1-6-6). Timisoara, RO.
Walter, J., Rothfischer, L., Stierstorfer, R., Nemoto, T., Franke, J., & Reitelshöfer, S. (2023). Tensegrity-Inspired Joint Can Protect from Impacts by Isolating. In Stéphane Caro, Andreas Pott, Tobias Bruckmann (Eds.), Mechanisms and Machine Science (pp. 344-354). Nantes, FRA: Springer Science and Business Media B.V..
Weigelt, M., Jordan, S., Manger, J., Kneidl, M., Masuch, M., Kühl, A., & Franke, J. (2023). Manufacturing influences on transmission efficiency and thermal integration of resonant circuit modules of inductive power transmission systems for electric vehicles. In 2023 IEEE Wireless Power Technology Conference and Expo, WPTCE 2023 - Proceedings. San Diego, CA, USA: Institute of Electrical and Electronics Engineers Inc..
Ziegler, M., Schafer, P., Wieprecht, N., Franke, J., & Kühl, A. (2023). Investigation of Insulation Layers on Additive Manufactured Electrical Steel Laminations in Electric Motors. IEEE Transactions on Dielectrics and Electrical Insulation, 1-1. https://doi.org/10.1109/TDEI.2023.3261821
von Lindenfels, J., Posch, D., Ihne, T., Franke, J., & Kühl, A. (2023). Functionally integrated additive manufactured rotor components for torque-dense aircraft electric motors. Procedia CIRP, 120, 998-1003. https://doi.org/10.1016/j.procir.2023.09.114

Bauer, J., Wichert, R., Konrad, C., Hechtel, M., Dengler, S., Uhrmann, S.,... Franke, J. (2022). ForeSight – User-Centered and Personalized Privacy and Security Approach for Smart Living. In Norbert A. Streitz, Shin'ichi Konomi (Eds.), Distributed, Ambient and Pervasive Interactions. Smart Living, Learning, Well-being and Health, Art and Creativity. (pp. 18-36). Cham: Springer.
Benke, E., Preis, A., Schulz, A., Reitelshöfer, S., & Franke, J. (2022). A Novel Concept for Unidirectional Communication With an Active Implant Based on Deliberately Produced Human Body Signals. In Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society (pp. 2479-2482). Glasgow, Scotland.
Blank, A., Baier, L., Zwingel, M., & Franke, J. (2022). Augmented Virtuality Data Annotation And Human-In-The-Loop Refinement For RGBD Data In Industrial Bin-Picking Scenarios. In Proceedings of the Conference on Production Systems and Logistics (pp. 829-838). Vancouver, Canada, CA: Offenburg: publish-Ing..
Bodendorf, F., Dehmel, K., & Franke, J. (2022). Scientific Approaches and Methodology to Determine the Value of Data as an Asset and Use Case in the Automotive Industry.
Bodendorf, F., Dimitrov, G., & Franke, J. (2022). Analyzing and evaluating supplier carbon footprints in supply networks. Journal of Cleaner Production, 372. https://doi.org/10.1016/j.jclepro.2022.133601
Bodendorf, F., & Franke, J. (2022). Application of the Technology Acceptance Model to an Intelligent Cost Estimation System: An Empirical Study in the Automotive Industry.
Bodendorf, F., & Franke, J. (2022). Multi-perspective analysis of monetary effects of information sharing between supply chain partners. Industrial Marketing Management, 104, 400-415. https://doi.org/10.1016/j.indmarman.2022.04.003
Bodendorf, F., Hollweck, B., & Franke, J. (2022). Information Asymmetry in Business-to-Business Negotiations: A Game Theoretical Approach to Support Purchasing Decisions with Suppliers. Group Decision and Negotiation. https://doi.org/10.1007/s10726-022-09780-3
Bodendorf, F., Wonn, F., Simon, K., & Franke, J. (2022). Indicators and countermeasures of modern slavery in global supply chains: Pathway to a social supply chain management framework. Business Strategy and the Environment. https://doi.org/10.1002/bse.3236
Bodendorf, F., Xie, Q., Merkl, P., & Franke, J. (2022). A multi-perspective approach to support collaborative cost management in supplier-buyer dyads. International Journal of Production Economics, 245, 108380. https://doi.org/10.1016/j.ijpe.2021.108380
Bräuer, P., Stoll, T., Muckelbauer, M., Hensel, A., & Franke, J. (2022). Pretreatment and Structuring of Spatial Circuit Carriers Based on Alumina for High Temperatures and High Frequencies. In IEEE 72ND ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2022) (pp. 992-999). San Diego, CA, US: NEW YORK: IEEE.
Bräuer, P., Stoll, T., Muckelbauer, M., Häußler, F., Hensel, A., & Franke, J. (2022). Manufacturing of Ceramic Based Mechatronic Integrated Devices Using Laser-Direct-Structuring. In IEEE (Eds.), Proceedings of the 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). Sibiu, RO.
Dengler, S., Bauer, J., Waldhör, K., Ristok, B., & Franke, J. (2022). Service Robots for Context Recognition in Smart Environments. In Günter Schreier, Bernhard Pfeifer, Martin Baumgartner, Dieter Hayn (Eds.), dHealth 2022. (pp. 232 - 233). IOS Press.
Fehrle, A., Teske, F., & Franke, J. (2022). Incentive models for electricity customers to participate in a cloud-based energy management system to generate flexibilities. In IEEE PES Innovative Smart Grid Technologies. Singapur, SG.
Franke, J., Weigelt, M., Kneidl, M., Masuch, M., & Kühl, A. (2022). Technical, Economical and Ecological Potentials of Electrified Roads. In Bleicher Friedrich (Eds.), Wiener Produktionstechnik Kongress 2022 (pp. 17-19). Wien, AT: Wien: new academic press.
Fröhlig, S., von Fabris auf Mayerhofen, M., Meiners, M., & Franke, J. (2022). Three-dimensional pose estimation of deformable linear object tips based on a low-cost, two-dimensional sensor setup and AI-based evaluation. In Anna Valente, Emanuele Carpanzano, Claudio Boer (Eds.), Procedia CIRP (pp. 499-504). Lugano, CH: Elsevier B.V..
Funk, F., Teske, F., Franke, J., Heider, C., Konig, M., & Soukup, O. (2022). A privacy-preserving, sealed double-auction smart contract for Local Energy Markets. In Workshop on Blockchain for Renewables Integration (BLORIN). Palermo, IT.
Gläßel, T., Riedel, A., Franke, J., & Kühl, A. (2022). Influence of Enameled Wire Preparation on the Laser welding of Hairpin Windings. In 2022 IEEE 67TH HOLM CONFERENCE ON ELECTRICAL CONTACTS (HLM) (pp. 120-124). Tampa, FL, US: NEW YORK: IEEE.
Gutwald, B., Ngankam Ndjiemeni, F., Barth, M., & Franke, J. (2022). Simulation-based efficiency comparison of different mains configurations for DC grid branches for supplying production plants based on a rule-compliant design. In Manufacturing Driving Circular Economy (pp. 440-448). Berlin.
Hecht, C., Slama, J.N., Sprenger, M., Haubler, F., Sippel, M., & Franke, J. (2022). Laser Cleaning of Flux Residues on Copper Surfaces in Electronics Production. In 2022 IEEE 28th International Symposium for Design and Technology in Electronic Packaging, SIITME 2022 - Conference Proceedings (pp. 65-69). Bucharest, ROU: Institute of Electrical and Electronics Engineers Inc..
Hefner, F., Schmidbauer, S., & Franke, J. (2022). Optimizing the wiring sequence based on a Constraint Satisfaction Problem for robot-based manufacturing of solderless wrapped connections. In Roberto Teti, Doriana D'Addona (Eds.), Procedia CIRP (pp. 203-208). Naples, IT: Elsevier B.V..
Herbert, M., Stirm, J., Hofmann, C., Fürst, J., & Franke, J. (2022). Automatische Identifikation mittels RFID - Rückverfolgbarkeit von Fertigungshilfsmitteln in der Produktion von Hochleistungsröntgenstrahlern. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117(9), 566-569. https://doi.org/10.1515/zwf-2022-1120
Hofmann, C., Fichtner, M., Lieret, M., & Franke, J. (2022). Efficient Semantic Mapping in Dynamic Environments. In PROCEEDINGS OF THE 17TH INTERNATIONAL JOINT CONFERENCE ON COMPUTER VISION, IMAGING AND COMPUTER GRAPHICS THEORY AND APPLICATIONS (VISAPP), VOL 4 (pp. 803-810). SETUBAL: SCITEPRESS.
Häußler, F., Sippel, M., Sprenger, M., Liu, L., Muckelbauer, M., & Franke, J. (2022). High Temperature Die Attach: Study and Power Cycling of Direct-Bonded Silver Joints. In IEEE (Eds.), Proceedings of the 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). Sibiu, RO.
Kirchberger, M., Heeger, M., Altay, A., Liebrecht, C., Overbeck, L., Kandler, M.,... Franke, J. (2022). Simulationsgestütztes Vorgehensmodell zur Realisierung einer Matrixfertigung. Zeitschrift Kunststofftechnik, 117(4), 224-228. https://doi.org/10.1515/zwf-2022-1037
Kuhn, M., Kaminski, E., & Franke, J. (2022). Track and Trace: Integrating static and dynamic data in a hybrid graph-based traceability model. In Roberto Teti, Doriana D'Addona (Eds.), Procedia CIRP (pp. 250-255). Naples, IT: Elsevier B.V..
Kühl, A., Kneidl, M., Seefried, J., Masuch, M., Weigelt, M., & Franke, J. (2022). Production Concepts for Inductive Power Transfer Systems for Vehicles. Energies, 15, 7911. https://doi.org/10.3390/en15217911
Lieret, M., Hübner, M., Hofmann, C., & Franke, J. (2022). Human Detection and Gesture Recognition for the Navigation of Unmanned Aircraft. In PROCEEDINGS OF THE 17TH INTERNATIONAL JOINT CONFERENCE ON COMPUTER VISION, IMAGING AND COMPUTER GRAPHICS THEORY AND APPLICATIONS (VISAPP), VOL 4 (pp. 831-838). SETUBAL: SCITEPRESS.
Lieret, M., Kreis, B., Hofmann, C., Zwingel, M., & Franke, J. (2022). Aerial Grasping and Transport Using an Unmanned Aircraft (UA) Equipped with an Industrial Suction Gripper. In Thorsten Schüppstuhl, Kirsten Tracht, Annika Raatz (Eds.), Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. (pp. 89-99). Cham: Springer.
Martens, B., & Franke, J. (2022). Identifying Agile Roles in Software Engineering Projects using Repository and Work-Tracking Data. In Proceedings of 2022 International Conference on Data and Software Engineering, ICoDSE 2022 (pp. 83-88). Bali, IDN: Institute of Electrical and Electronics Engineers Inc..
Martens, B., & Franke, J. (2022). Matching Corporate Software Engineers and Data Offerings - from Discovery to Recommendations. In 2022 19th International Joint Conference on Computer Science and Software Engineering, JCSSE 2022. Bangkok, TH: Institute of Electrical and Electronics Engineers Inc..
Martin, S., Bruns, A., & Franke, J. (2022). Dynamic Light Control Using Bionic Dielectric Elastomer Iris Actuators. Advanced Functional Materials, 2112260. https://doi.org/10.1002/adfm.202112260
Martin, S., Riethmüller, J., Weigand, C., Reitelshöfer, S., & Franke, J. (2022). Induction of anisotropic motions in dielectric elastomer actuators by additive manufacturing. In Iain A. Anderson, John D. W. Madden, Herbert R. Shea (Eds.), Proceedings of SPIE - The International Society for Optical Engineering. Long Beach, CA, USA: SPIE.
Mayr, A., Baader, M., Raffin, T., Riedel, A., & Franke, J. (2022). Towards an intelligent straightening system for flat enameled copper wire: problem statement, review of related work, and basic concept. Procedia CIRP, 115, 220-225. https://doi.org/10.1016/j.procir.2022.10.077
Mayr, A., Bauer, J., & Franke, J. (2022). A multi-view deep learning approach for quality assessment in laser welding of hairpin windings based on 2D image captures. Procedia CIRP, 115, 196-201. https://doi.org/10.1016/j.procir.2022.10.073
Mayr, A., Rommel, C., Schaller, V., & Franke, J. (2022). Kennzahlenbasiertes F & E-Controlling im Kontext der Elektromobilität: Methodische Erarbeitung eines Kennzahlengerüsts für das operative F & E-Controlling am Beispiel eines Maschinen- und Anlagenbauers. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117(3), 133-138. https://doi.org/10.1515/zwf-2022-1023
Meier, S., Erkan, A., Thielen, N., Klarmann, S., & Franke, J. (2022). Attention-based Image Compression in Sensor Assembly. In 2022 IEEE 28th International Symposium for Design and Technology in Electronic Packaging, SIITME 2022 - Conference Proceedings (pp. 136-141). Bucharest, ROU: Institute of Electrical and Electronics Engineers Inc..
Merz, N., Erkan, A., Bodendorf, F., & Franke, J. (2022). Let Me Entertain You – A Quantitative Study on the Acceptance of Consumer Entertainment Robots. In Proceedings of the 54th International Symposium on Robotics, ISR Europe 2022 (pp. 311-318). Munich, Germany: VDE VERLAG GMBH.
Merz, N., Franke, J., & Bodendorf, F. (2022). Are we prepared for the Rise of Service Robots? - A Review on Acceptance Measurement. In The Human Side of Service Engineering.
Nemoto, T., Walter, J., Bachmann, C., Gerlich, M., Reitelshöfer, S., & Franke, J. (2022). Highly Dynamic 2-DOF Cable-Driven Robotic Wrist based on a Novel Topology. IEEE Robotics and Automation Letters, 1-1. https://doi.org/10.1109/LRA.2022.3159816
Nguyen, H.G., Habiboglu, R., & Franke, J. (2022). Enabling deep learning using synthetic data: A case study for the automotive wiring harness manufacturing. Procedia CIRP, 107, 1263-1268. https://doi.org/10.1016/j.procir.2022.05.142
Ockel, M., Hensel, A., & Franke, J. (2022). Suitability of a 2 kw 515 nm Continous Wave Laser for Deep Penetration Welding of Copper. In 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings. Virtual, DE: Institute of Electrical and Electronics Engineers Inc..
Ottinger, B., Holverscheid, J., Konig, S., Jerichow, E., Lunz, S., Sprenger, M.,... Franke, J. (2022). Reliability of lead-free solders for die attach in automotive power modules. In Proceedings of the 24th Electronics Packaging Technology Conference, EPTC 2022 (pp. 409-413). Singapore, SG: Institute of Electrical and Electronics Engineers Inc..
Ottinger, B., Murk, S., König, S., Zangarro, A., Müllmaier, M., Müller, L., & Franke, J. (2022). Location dependent down-rating of voids in high power solder connections for automotive power modules. In Proceedings of the Conference of High Temperature Electronics Network (HITEN 2022) (pp. 000041-000044). St. Anne's College, Oxford, GB.
Petillon, S., Knöller, A., Bräuer, P., Helm, D., Grözinger, T., Weser, S.,... Zimmermann, A. (2022). Flexural Fatigue Test—A Proposed Method to Characterize the Lifetime of Conductor Tracks on Polymeric Substrates. Journal of Manufacturing and Materials Processing, 6(2). https://doi.org/10.3390/jmmp6020041
Preis, A., Treviranus, J., Benke, E., Reitelshöfer, S., & Franke, J. (2022). Novel Concept for a Mechanical Intraurethral Artificial Urinary Sphincter. In Proceedings of the 15th International Joint Conference on Biomedical Engineering Systems and Technologies - BIODEVICES (pp. 170 - 176).
Raffin, T., Reichenstein, T., Klier, D., Kühl, A., & Franke, J. (2022). Qualitative assessment of the impact of manufacturing-specific influences on Machine Learning Operations. Procedia CIRP, 115, 136-141. https://doi.org/10.1016/j.procir.2022.10.063
Raffin, T., Reichenstein, T., Werner, J., Kühl, A., & Franke, J. (2022). A reference architecture for the operationalization of machine learning models in manufacturing. Procedia CIRP, 115, 130-135. https://doi.org/10.1016/j.procir.2022.10.062
Reichenstein, T., Raffin, T., Sand, C., & Franke, J. (2022). Implementation of Machine Vision based Quality Inspection in Production: An Approach for the Accelerated Execution of Case Studies. Procedia CIRP, 112, 596-601. https://doi.org/10.1016/j.procir.2022.09.058
Riedel, A., Kühl, A., Franke, J., Graf, R., Hubert, T., & Bauer, D. (2022). Experimental Investigation of a New Manufacturing Technology for Hairpin Stators with Litz Wires. In 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings. Virtual, Online, DEU: Institute of Electrical and Electronics Engineers Inc..
Rösel, U., Kneidl, M., Drummer, D., & Franke, J. (2022). Possibilities of Integrated Fabrication of Insulation Systems in Electric Drives by Injection Molding of Thermosets. Polymers, 14, 5352. https://doi.org/10.3390/polym14245352
Schmidt, K., Haas, L., Latifi Bidarouni, A., Reinhardt, A., Döpper, F., & Franke, J. (2022). A Methodology for Predictive Life Expectancy of Moisture-Sensitive SMT components using Neural Networks. Procedia CIRP, 107, 1373-1378. https://doi.org/10.1016/j.procir.2022.05.160
Schwab, M., Madeline-Derou, C., Klarmann, S., Thielen, N., Meier, S., Franke, J.,... Stork, W. (2022). Multi-Model Machine Learning based Industrial Vision Framework for Assembly Part Quality Control. In IEEE International Conference on Emerging Technologies and Factory Automation, ETFA. Stuttgart, DEU: Institute of Electrical and Electronics Engineers Inc..
Schäffer, E., Gönnheimer, P., Kupzik, D., Brossog, M., Coutandin, S., Franke, J., & Fleischer, J. (2022). Web-Based Platform for Planning and Configuration of Robot-Based Automation Solutions: A Retrospective View on the Research Project ROBOTOP. In Schüppstuhl T, Tracht K, Raatz A (Eds.), Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021 (pp. 387--397). Cham: Springer International Publishing.
Seefried, J., Schwarz, E.B., Bleier, F., Franke, J., Bergmann, J.P., & Kühl, A. (2022). Optimization of the Ultrasonic Crimping Process of High-Frequency Litz Wires by Using Process Data Monitoring. In 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings. Online, DE: Institute of Electrical and Electronics Engineers Inc..
Seidel, R., Ahrens, T., Friedrich, J., Reinhardt, A., & Franke, J. (2022). Experimental identification and prioritization of design and process parameters on hole fill in mini wave soldering. Microelectronics Reliability, 131, 114497. https://doi.org/10.1016/j.microrel.2022.114497
Seidel, R., Ockel, M., Franke, J., & Kästle, C. (2022). Impact of THT-hole dimensioning on manufacturability in selective wave soldering. Microelectronics Reliability, 137, 114773. https://doi.org/10.1016/j.microrel.2022.114773
Seidel, R., Schmidt, K., Thielen, N., & Franke, J. (2022). Trustworthiness of machine learning models in manufacturing applications using the example of electronics manufacturing processes. In Anna Valente, Emanuele Carpanzano, Claudio Boer (Eds.), Procedia CIRP (pp. 487-492). Lugano, CH: Elsevier B.V..
Seidel, R., Sippel, M., & Franke, J. (2022). 2-D Fluid Simulation Approach for Miniwave Soldering. San Diego, CA, US: IEEE.
Selmaier, A., Kunz, D., Kißkalt, D., Benaziz, M., Fürst, J., & Franke, J. (2022). Artificial Intelligence‐Based Assistance System for Visual Inspection of X‐ray Scatter Grids. Sensors, 22(3). https://doi.org/10.3390/s22030811
Seßner, J., Dellert, F., & Franke, J. (2022). Multimodal Feedback to Support the Navigation of Visually Impaired People. In Proceedings of the 2022 IEEE/SICE International Symposium on System Integration (SII). Narvik, NO.
Seßner, J., Dellert, F., & Franke, J. (2022). Multimodal Feedback to Support the Navigation of Visually Impaired People. In 2022 IEEE/SICE International Symposium on System Integration, SII 2022 (pp. 196-201). Virtual, Narvik, NOR: Institute of Electrical and Electronics Engineers Inc..
Seßner, J., Porstmann, A., Kirst, S., Merz, N., Dziobek, I., & Franke, J. (2022). A Modular Interface for Controlling Interactive Behaviors of a Humanoid Robot for Socio-Emotional Skills Training. In RO-MAN 2022 - 31st IEEE International Conference on Robot and Human Interactive Communication: Social, Asocial, and Antisocial Robots (pp. 230-235). Napoli, IT: Institute of Electrical and Electronics Engineers Inc..
Seßner, J., Reitelshöfer, S., Lieret, M., Springs, K., & Franke, J. (2022). Robot-based Sample Tube Handling for Automated Pre- and Post-processing of SARS-CoV-2 PCR Tests. In 54th International Symposium on Robotics, ISR Europe 2022 (pp. 248-254). Munich, DEU: VDE VERLAG GMBH.
Seßner, J., Schade, F., & Franke, J. (2022). Obstacle Segmentation with Encoder-Decoder Architectures in Low Structured Environments for the Navigation of Visually Impaired People. In Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS (pp. 4269-4273). Glasgow, GBR: Institute of Electrical and Electronics Engineers Inc..
Sippel, M., Hassel, S., Schmidt, R., Sprenger, M., Hecht, C., & Franke, J. (2022). Impact of Aluminum Metallization Reconstruction on the Current Distribution in Power Semiconductors. In 2022 IEEE 9th Electronics System-Integration Technology Conference, ESTC 2022 - Proceedings (pp. 439-445). Sibiu, RO: Institute of Electrical and Electronics Engineers Inc..
Sippel, M., Schmidt, R., Kaesbauer, M., Sprenger, M., Hensel, A., & Franke, J. (2022). Influence of Current Density on Wire Bond Lifetime in Active Power Cycling Test. In IEEE (Eds.), Electronics Packaging Technology Conference (EPTC). Singapore, SG.
Sippel, M., Schmidt, R., Rau, F., Bretscher, D., Seidel, R., & Franke, J. (2022). Improved Thermal Impedance Measurement for Power Modules based on Thermal Imaging of the Baseplate. In Proceedings of the 12th International Conference on Integrated Power Electronics Systems (CIPS 2022) (pp. 186--191). Berlin, Germany, DE: Berlin and Offenbach: VDE Verlag GmbH.
Sprenger, M., Forndran, F., Ottinger, B., Braun, T., & Franke, J. (2022). Reliability assessment and thermal characterization of automotive power module package based on novel thick copper-ceramic substrate and hard epoxy encapsulation. In Proceedings of the 12th International Conference on Integrated Power Electronics Systems (CIPS 2022) (pp. 88-93). Berlin, DE: Berlin and Offenbach: VDE Verlag Gmbh.
Sprenger, M., Forndran, F., Ottinger, B., Dammann, T., Erben, B., Sippel, M., & Franke, J. (2022). Hard encapsulation of automotive power modules by epoxy potting-encapsulant selection assisted by thermo-mechanical simulation. In 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. St Julian, MT: Institute of Electrical and Electronics Engineers Inc..
Sprenger, M., Noll, N., Hecht, C., De Greiff, M., Müller, L., & Franke, J. (2022). Parametric study on relevant design and material parameters for reliable hard encapsulation of automotive power modules. In Proceedings of the 24th Electronics Packaging Technology Conference, EPTC 2022 (pp. 660-667). Singapore, SG: Institute of Electrical and Electronics Engineers Inc..
Stoll, T., Feuerer, T., Hensel, A., & Franke, J. (2022). Review of the direct bonded copper (DBC) process and its adaption to laser powder bed fusion (LPBF). In Bo Gu, Hongqiang Chen, Henry Helvajian (Eds.), Proceedings of SPIE - The International Society for Optical Engineering. Virtual, Online: SPIE.
Teske, F., Fehrle, A., Funk, F., & Franke, J. (2022). Economic Scheduling of Multi-Microgrid System Considering Power Grid Expansion Costs.
Teske, F., Funk, F., Fehrle, A., & Franke, J. (2022). Evaluation of Market Designs for Local Energy Markets to Support the Distribution Grid. In 2022 IEEE PES Transactive Energy Systems Conference, TESC 2022. Portland, OR, US: Institute of Electrical and Electronics Engineers Inc..
Teske, F., Funk, F., Fehrle, A., & Franke, J. (2022). Impact of Electric Vehicle Charging Behavior on the Transmission System and the Electricity Market in Germany. In 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings. Virtual, Online, DEU: Institute of Electrical and Electronics Engineers Inc..
Teske, F., Funk, F., Fehrle, A., & Franke, J. (2022). Techno-Economic Comparison of Trading Agents for Renewable Energy Communities. In IEEE. Singapur, SG.
Thielen, N., Pan, W., Piechulek, N., Voigt, C., Meier, S., Schmidt, K., & Franke, J. (2022). Machine Learning Based Quality Prediction for Solder Paste Dispensing in Electronics Production. In Proceedings of the 24th Electronics Packaging Technology Conference, EPTC 2022 (pp. 858-863). Singapore, SGP: Institute of Electrical and Electronics Engineers Inc..
Utsch, D., Milich, N., Ankenbrand, M., & Franke, J. (2022). Herstellung räumlicher Schaltungsträger mit keramischen Materialien mittels digitaler Fertigungsverfahren. In DVS Media GmbH (Hrg.), Elektronische Baugruppen und Leiterplatten EBL 2022 (S. 291-296). Fellbach, DE.
Utsch, D., Piechulek, N., & Franke, J. (2022). Additive Manufacturing of 3D Circuit Carriers with Improved Thermal Conductivity. In Proceedings of the 45th International Spring Seminar on Electronics Technology (ISSE). Wien, AT.
Vogel, A., Morello, A., Mahr, A., Franke, J., & Kühl, A. (2022). Challenges in Cost-effective Automated Detection of Enameled Flat Wires in the Context of Robot-based Stator Manipulation. In Proceedings of the 2022 12th International Electric Drives Production Conference (EDPC). Regensburg.
Walter, J., Grau, S., Raczok, T., Reitelshofer, S., & Franke, J. (2022). Bringing the new class of cable-driven parallel robots to the world of industrial cyber-physical systems based on RAMI 4.0. In IEEE (Eds.), 2022 IEEE 5th International Conference on Industrial Cyber-Physical Systems (ICPS). Coventry, GB: IEEE.
Walter, J., Nemoto, T., Bachmann, C., Gerlich, M., Reitelshöfer, S., & Franke, J. (2022). Cable-driven robotic joint for automated hammering Seilrobotergelenk für automatisiertes Hämmern. wt Werkstattstechnik - Online, 112(9), 625-628. https://doi.org/10.37544/1436-4980-2022-09-97
Walter, J., Roßmanith, P., Souza de Oliveira, D., Reitelshofer, S., Del Vecchio, A., & Franke, J. (2022). Proportional Control of a Soft Cable-Driven Exoskeleton via a Myoelectrical Interface Enables Force-Controlled Finger Motions. In International Conference on Biomedical Robotics and Biomechatronics (BioRob). Seoul, KR: Seoul.
Ziegler, M., Brandl, F., Franke, J., & Kühl, A. (2022). Numerical Simulation of the Laser Welding Process for Electrical Steel Laminations. In 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings. Virtual, Online, DEU: Institute of Electrical and Electronics Engineers Inc..
Zwingel, M., May, C., Kalenberg, M., & Franke, J. (2022). Robotics simulation – A comparison of two state-of-the-art solutions. In ASIM 2022 Proceedings Langbeiträge.
Zwingel, M., Schuderer, P., & Franke, J. (2022). A Hybrid Metric for Navigation of Autonomous Intralogistics Vehicles in Mixed Indoor and Outdoor Operation. In Herberger, D.; Hübner, M. (Eds.), Proceedings of the Conference on Production Systems and Logistics: CPSL 2022. (pp. 785-794). Hannover: publish-Ing..
von Lindenfels, J., Ihne, T., Franke, J., & Kühl, A. (2022). Electric Propulsion Units in aviation - approach for a mechanical permanent magnet rotor design and the related manufacturing concept. In 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings. Virtual, Online, DEU: Institute of Electrical and Electronics Engineers Inc..
von Lindenfels, J., Qomi, M.P., Utsch, D., Franke, J., Kühl, A., Reibenweber, L., & Stadler, A. (2022). Electromagnetic Actuators Suitable for High Temperatures Using Thin Aluminum Foil as Conductor. In 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings. Virtual, Online, DEU: Institute of Electrical and Electronics Engineers Inc..

Baader, M., Mayr, A., Raffin, T., Selzam, J.H., Kühl, A., & Franke, J. (2021). Potentials of Optical Coherence Tomography for Process Monitoring in Laser Welding of Hairpin Windings. In Proceedings of the 11th International Electric Drives Production Conference (EDPC). Erlangen, DE.
Backhaus, C., Förner, J., Wienke, A., Hoffmann, G.-A., Eiche, Y., Lorenz, L.,... Lindlein, N. (2021). Influence on the optical performance of droplets and enclosures in printed polymer optical waveguides. In Witzigmann B, Osiński M, Arakawa Y (Eds.), Physics and Simulation of Optoelectronic Devices XXIX (pp. 26 -- 34). SPIE.
Bakakeu, J., Baer, S., Klos, H.H., Peschke, J., Brossog, M., & Franke, J. (2021). Multi-Agent Reinforcement Learning for the Energy Optimization of Cyber-Physical Production Systems. In Alexiei Dingli, Foaad Haddod, Christina Klüver (Eds.), Artificial Intelligence in Industry 4.0. (pp. 143-163). Cham: Springer Science and Business Media Deutschland GmbH.
Bauer, J., Dengler, S., Faubel, L., Franke, J., Ristok, B., Struck, M.,... Wittenberg, T. (2021). Pandemic Robot A concept for robot-based surveillance of inhabitants in elderly and nursing homes during pandemic situations. Current Directions in Biomedical Engineering, 7(2), 601-604. https://doi.org/10.1515/cdbme-2021-2153
Bauer, J., Konrad, C., Hechtel, M., Wichert, R., Weigand, C., Dengler, S.,... Franke, J. (2021). ForeSight Approach to improve Privacy and Security in the Smart Living Domain. Current Directions in Biomedical Engineering, 7(2), 903-906. https://doi.org/10.1515/cdbme-2021-2230
Benke, E., Stoinski, R.T., Preis, A., Reitelshöfer, S., Martin, S., & Franke, J. (2021). Intraurethral Energy Harvesting from Urine Flow as an approach to power Urologic Implants. In Proceedings of the 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC).
Berger, J., Colceriu, C., Blank, A., Franke, J., Härdtlein, C., Hellig, T.,... Zäh, M. (2021). Abschlussbericht: FORobotics - mobile ad-hoc kooperierende Roboterteams, Aktenzeichen AZ-1225-16, Förderzeitraum 1.1.2017-30.6.2020, Berichtszeitraum: 1.1.2017-30.6.2020. Augsburg: Fraunhofer-Publica.
Blank, A., Baier, L., Kedilioglu, O., Zhu, X., Metzner, M., & Franke, J. (2021). Effiziente KI-Adaption durch synthetische Daten/Efficient AI Adaption using Synthetic Data. wt Werkstattstechnik - Online, 111 (2021)(10), 759-762. https://doi.org/10.37544/1436-4980-2021-10-105
Blank, A., Hiller, M., Heuss, L., Roder, S., Thielecke, J., & Franke, J. (2021). Umfelderkennung, Absicherung und lokale Bahnplanung - Teilprojekt 2. In Fraunhofer-Gesellschaft (Eds.), Abschlussbericht: FORobotics - mobile ad-hoc kooperierende Roboterteams; Aktenzeichen AZ-1225-16, Förderzeitraum 1.1.2017-30.6.2020, Berichtszeitraum: 1.1.2017-30.6.2020;. (pp. 39-72). Augsburg: Fraunhofer-Publica.
Blank, A., Karlidag, E., Zikeli, G., Metzner, M., & Franke, J. (2021). Adaptive Motion Control Middleware for Teleoperation Based on Pose Tracking and Trajectory Planning. In Schüppstuhl, Thorsten; Tracht, Kirsten; Raatz, Annika (Eds.), Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Hannover, Germany: Berlin: Springer International Publishing.
Blank, A., Kosar, E., Karlidag, E., Guo, Q., Kohn, S., Sommer, O.,... Franke, J. (2021). Hybrid Environment Reconstruction Improving User Experience and Workload in Augmented Virtuality Teleoperation. In George-Christopher Vosniakos (Eds.), Procedia Manufacturing (pp. 40-47). Athens, Greece, GR: Amsterdam: Elsevier.
Bodendorf, F., & Franke, J. (2021). A machine learning approach to estimate product costs in the early product design phase: a use case from the automotive industry. Procedia CIRP, 100, 643-648. https://doi.org/10.1016/j.procir.2021.05.137
Bodendorf, F., Lutz, M., & Franke, J. (2021). Valuation and pricing of software licenses to support supplier–buyer negotiations: A case study in the automotive industry. Managerial and Decision Economics. https://doi.org/10.1002/mde.3336
Bodendorf, F., Lutz, M., Michelberger, S., & Franke, J. (2021). An empirical investigation into intelligent cost analysis in purchasing. Supply Chain Management-An International Journal, ahead-of-print. https://doi.org/10.1108/SCM-11-2020-0563
Bodendorf, F., Merbele, S., & Franke, J. (2021). Deep learning based cost estimation of circuit boards: a case study in the automotive industry. International Journal of Production Research. https://doi.org/10.1080/00207543.2021.1998698
Bodendorf, F., Merkl, P., & Franke, J. (2021). Artificial neural networks for intelligent cost estimation – a contribution to strategic cost management in the manufacturing supply chain. International Journal of Production Research, 1-22. https://doi.org/10.1080/00207543.2021.1998697
Bodendorf, F., Merkl, P., & Franke, J. (2021). Intelligent cost estimation by machine learning in supply management: A structured literature review. Computers & Industrial Engineering, 160. https://doi.org/10.1016/j.cie.2021.107601
Bodendorf, F., Wytopil, B., & Franke, J. (2021). Business Analytics in Strategic Purchasing: Identifying and Evaluating Similarities in Supplier Documents. Applied Artificial Intelligence, 1-19. https://doi.org/10.1080/08839514.2021.1936423
Deuerlein, C., Müller, F., Seßner, J., Heß, P., & Franke, J. (2021). Improved design flexibility of open robot cells through tool-center-point monitoring. In Procedia CIRP (pp. 295-300). Enschede, NLD: Elsevier B.V..
Fehrle, A., Funk, F., Teske, F., Dorscht, F., & Franke, J. (2021). Integration of electric vehicles in time-flexible charging processes through contracting models. In IEEE (Eds.), Proceedings of the 2021 11th International Electric Drives Production Conference (EDPC). Erlangen, DE.
Fehrle, A., Teske, F., Dorscht, F., & Franke, J. (2021). Potential analysis of a cloud-based energy management system for the generation of flexibilities. In Proceedings of the IEEE PES Innovativ Smart Grid Technologies ISGT 2021. Espoo, FI.
Franke, J., Wang, L., Bock, K., & Wilde, J. (2021). Electronic module assembly. CIRP Annals - Manufacturing Technology, 70(2), 471-493. https://doi.org/10.1016/j.cirp.2021.05.005
Friedlein, M., Gräf, D., Stegner, J., & Franke, J. (2021). Development and application of load profiles for thermal qualification testing of receptacle automotive connectors. Materials Testing, 63(3), 272-278. https://doi.org/10.1515/mt-2020-0040
Fuchs, J., Herrmann, H., Oks, S.J., Sjarov, M., & Franke, J. (2021). Increasing Efficiency in Maintenance Processes Through Modular Service Bundles. In Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg (Eds.), Production at the leading edge of technology, Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. (pp. 439-447). Berlin, Heidelberg: Springer.
Fuchs, J., Schneider, R., Oks, S.J., & Franke, J. (2021). Service-based integration of modular control components in digital manufacturing platforms. In Proceedings of the 2021 IEEE 19th International Conference on Industrial Informatics (INDIN). Palma de Mallorca, ES.
Funk, F., & Franke, J. (2021). Matching in decentralized two-sided markets via Blockchain-based deferred acceptance. In Proceedings of the 2021 3rd Conference on Blockchain Research Applications for Innovative Networks and Services (BRAINS). Paris, FR.
Funk, F., Teske, F., Fehrle, A., & Franke, J. (2021). Increasing charging station availability through peer-to-peer reservation markets. In IEEE (Eds.), Proceedings of the 2021 11th International Electric Drives Production Conference (EDPC). Erlangen, DE.
Goes, N., Kirst, S., Seßner, J., Steffan, J., Struck, M., Franke, J.,... Wittenberg, T. (2021). Evaluation of an algorithm for optical pulse detection in children for application to the Pepper robot. Current Directions in Biomedical Engineering, 7(2), 484-487. https://doi.org/10.1515/cdbme-2021-2123
Haas, L., Döpper, F., Schmidt, K., Franke, J., & Reinhardt, A. (2021). Studies and Analyses of Moisture Conditioned SMT-Components. In Proceedings of the 2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC). Gothenburg, SE: IEEE.
Hamjah, M.K., Steinberger, M., Tam, K.C., Egelhaaf, H.J., Brabec, C., & Franke, J. (2021). Aerosol jet printed AgNW electrode and PEDOT:PSS layers for organic light-emitting diode devices fabrication. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc..
Hamjah, M.K., Thielen, N., Hagelloch, J.E., & Franke, J. (2021). Machine Learning Approach towards Quality Control of Aerosol-Jet Printed Polymer Optical Waveguides Material. In TENSYMP 2021 - 2021 IEEE Region 10 Symposium. Jeju, KR: Institute of Electrical and Electronics Engineers Inc..
Hamjah, M.K., Zeitler, J.T., Eiche, Y., Lorenz, L., Backhaus, C., Hoffmann, G.A.,... Franke, J. (2021). Manufacturing of Polymer Optical Waveguides for 3D-Opto-MID: Review of the OPTAVER Process. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc..
Hartmann, L., Sabban, J., Behrendt, F., Tatai, T.M., Neermann, S., Franke, J., & Dreyer, C. (2021). Sintering of conductive inks on plastic substrates by use of microwave furnaces being suitable for largescale production processes. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc..
Hartner, F., Kerker, S., Bodendorf, F., Kirchner, M., Uebler, M., & Franke, J. (2021). Methodik zur monetären Bewertung von Serviceplattformen - Eine systematische Analyse von Plattforminteraktionen. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116(1), 91-95. https://doi.org/10.1515/zwf-2021-0018
Hartner, F., Link, F., Fuchs, J., & Franke, J. (2021). Methodology for the Analysis of Platform-Based Value Networks in the Manufacturing Industry. In Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis (Eds.), Production at the Leading Edge of Technology (pp. 610-620). Dresden, DE: Springer Nature.
Hartner, F., Löwen, U., & Franke, J. (2021). Differentiating Industrial Internet of Things platforms from a value network-oriented perspective. Procedia CIRP, 103, 8-13. https://doi.org/10.1016/j.procir.2021.09.090
Hartner, F., Löwen, U., & Franke, J. (2021). Digital Industrial B2B Platform Patterns From A Business Perspective. In Herberger, David; Hübner, Marco (Eds.), Proceedings of the 2nd Conference on Production Systems and Logistics (CPSL 2021) (pp. 191-201). Hannover: Institutionelles Repositorium der Leibniz Universität Hannover.
Hartner, F., Löwen, U., & Franke, J. (2021). Typisierung von Netzwerkeffekten für digitale Plattformen in der produzierenden Industrie. In Jürgen Gausemeier, Wilhelm Bauer, Roman Dumitrescu (Hrg.), Vorausschau und Technologieplanung 16. Symposium für Vorausschau und Technologieplanung (S. 201-221). Berlin.
Havenith, A., Dürr, M., Helmes, C., Krycki, K., Hansmann, T., Hansmann, B.,... Franke, J. (2021). Robotergestützte Sortierung radioaktiver Abfälle zwecks volumenoptimierter Konditionierung - VIRERO. In Tagungsband 15th International Symposium “Conditioning of Radioactive Operational & Decommissioning Wastes” including 15th Status Report of BMBF “Decommissioning and Dismantling of Nuclear Facilities“ (S. 113-126). Dresden, DE.
Herbert, M., Heinlein, P., Fuerst, J., & Franke, J. (2021). A systematic approach for planning, analyzing and evaluating internal material provision. In FAIM 2021 (pp. 447-454). Athens, GR: AMSTERDAM: ELSEVIER SCIENCE BV.
Herbert, M., Zwingel, M., Czapka, C., & Franke, J. (2021). A Multi-source Localization System for Driverless Material Transport in Mixed Indoor and Outdoor Areas. In Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis (Eds.), Production at the Leading Edge of Technology (pp. 421-429). Dresden, DE: Springer Link.
Häußler, F., Schöttner, J., Schubert, J., Muckelbauer, M., Spiecker, E., & Franke, J. (2021). Examining Ag-Ag Direct Bonding on Chemically Coated DBC Substrates as a Pasteless Die-Attach Approach. In VDE (Eds.), Proceedings of the PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (pp. 1-8). Nürnberg, DE: Berlin: VDE.
Kedilioglu, O., Bocco, T.M., Landesberger, M., Rizzo, A., & Franke, J. (2021). ArUcoE: Enhanced ArUco Marker. In IEEE. Jeju, KR.
Kedilioglu, O., Lieret, M., Schottenhamml, J., Würfl, T., Blank, A., Maier, A., & Franke, J. (2021). RGB-D-based Human Detection and Segmentation for Mobile Robot Navigation in Industrial Environments. In Giovanni Maria Farinella, Petia Radeva, Jose Braz, Kadi Bouatouch (Eds.), Proceedings of the 16th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (VISIGRAPP 2021) (pp. 219-226). SciTePress.
Kneidl, M., Benke, D., Masuch, M., Kühl, A., & Franke, J. (2021). In-line Measurement Techniques of Resin-based Insulation Processes for Wireless Power Transfer Systems. In IEEE (Eds.), 2021 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (pp. 167--170). Vancouver, BC, Canada, CA: New York, USA: IEEE.
Kneidl, M., Masuch, M., Rieger, D., Kühl, A., & Franke, J. (2021). Processing influences of resin-based insulation materials for wireless power transfer applications. In IEEE (Eds.), 2020 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (pp. 551-555). East Rutherford, NJ, USA: NY, USA: IEEE.
Kuhn, M., & Franke, J. (2021). Data continuity and traceability in complex manufacturing systems: a graph-based modeling approach. International Journal of Computer Integrated Manufacturing, 6185(1), 1-18. https://doi.org/10.1080/0951192X.2021.1901320
Kuhn, M., Funk, F., & Franke, J. (2021). Blockchain architecture for automotive traceability. In Proceedings of the 8th CIRP Conference of Assembly Technology and Systems (pp. 390-395). Athens, GR.
Kuhn, M., Funk, F., Zhang, G., & Franke, J. (2021). Blockchain-based application for the traceability of complex assembly structures. Journal of Manufacturing Systems, 59, 617–630. https://doi.org/10.1016/j.jmsy.2021.04.013
Kühl, A., & Franke, J. (2021). Improving the Inductive Crimping Technology in the Production of Electric Motors. In 2021 IEEE SIXTY-SIXTH HOLM CONFERENCE ON ELECTRICAL CONTACTS (HLM) (pp. 123-129). San Antonio, TX: NEW YORK: IEEE.
Kühl, A., & Franke, J. (2021). Robot-based Forming of Hairpin Winding. In 2021 IEEE International Electric Machines and Drives Conference, IEMDC 2021. Hartford, CT, USA: Institute of Electrical and Electronics Engineers Inc..
Lechler, T., Sjarov, M., & Franke, J. (2021). Data Farming in Production Systems - A Review on Potentials, Challenges and Exemplary Applications. Procedia CIRP, 96, 230-235. https://doi.org/10.1016/j.procir.2021.01.156
Lieret, M., Kalenberg, M., Hofmann, C., & Franke, J. (2021). Environment representation and path planning for unmanned aircraft in industrial indoor applications. In FAIM 2021 (pp. 176-182). Athens, GR: AMSTERDAM: ELSEVIER SCIENCE BV.
Lieret, M., Kogan, V., Hofmann, C., & Franke, J. (2021). Automated Exploration, Capture and Photogrammetric Reconstruction of Interiors Using An Autonomous Unmanned Aircraft. In 2021 IEEE International Conference on Mechatronics and Automation, ICMA 2021 (pp. 301-306). Takamatsu, JP: Institute of Electrical and Electronics Engineers Inc..
Lieret, M., Wurmer, F., Hofmann, C., & Franke, J. (2021). An overhead docking and charging station for autonomous unmanned aircraft. In IEEE International Conference on Automation Science and Engineering (pp. 1358-1363). Lyon, FRA: IEEE Computer Society.
Lomakin, K., Wang, L., Job, A., Süß-Wolf, R., Franke, J., Helmreich, K., & Gold, G. (2021). Additive Manufacturing of Coplanar Transmission Lines on Alumina Substrate up to 24 GHz using Laser Assisted Selective Metallization. In 2020 50th European Microwave Conference (EuMC). Utrecht, NL.
Lorenz, L., Hanesch, F., Nieweglowski, K., Hamjah, M.K., Franke, J., Hoffmann, G.-A.,... Bock, K. (2021). Reliability of 3D-Opto-MID Packages for Asymmetric Optical Bus Couplers. In IEEE 71ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2021) (pp. 14-21). , ELECTR NETWORK: LOS ALAMITOS: IEEE COMPUTER SOC.
Lutz, B., Howell, P., Regulin, D., Engelmann, B., & Franke, J. (2021). Towards Material-Batch-Aware Tool Condition Monitoring. Journal of Manufacturing and Materials Processing, 5(4). https://doi.org/10.3390/jmmp5040103
Lutz, B., Kißkalt, D., Regulin, D., Aybar, B., & Franke, J. (2021). Automated Domain Adaptation in Tool Condition Monitoring using Generative Adversarial Networks. In IEEE International Conference on Automation Science and Engineering (pp. 1326-1331). Lyon, FRA: IEEE Computer Society.
Lutz, B., Kißkalt, D., Regulin, D., Hauser, T., & Franke, J. (2021). Material identification for smart manufacturing systems: A review. In Proceedings - 2021 4th IEEE International Conference on Industrial Cyber-Physical Systems, ICPS 2021 (pp. 353-360). Virtual, Online: Institute of Electrical and Electronics Engineers Inc..
Lutz, M., Bodendorf, F., Stepanek, N., & Franke, J. (2021). Cost engineering in practice – Empirical investigation of cost calculation tools. In Procedia Manufacturing (Eds.), Proceedings of the 10th CIRP Sponsored Conference on Digital Enterprise Technologies (DET 2020) – Digital Technologies as Enablers of Industrial Competitiveness and Sustainability (pp. 13-18). Budapest, HU.
Mahr, A., Hartz, B., & Franke, J. (2021). Interaction between a spray-insulation for phase separation in the winding head and the following impregnation process in insertion winding stators. In 2021 11TH INTERNATIONAL ELECTRIC DRIVES PRODUCTION CONFERENCE (EDPC) (pp. 100-106). Online, DE: NEW YORK: IEEE.
Mahr, A., Kneidl, M., Regler, J., & Franke, J. (2021). Process design and evaluation for the automation of interphase insulation for distributed windings. Procedia Manufacturing, 55, 226-231. https://doi.org/10.1016/j.promfg.2021.10.032
Martens, B., Petho, P., Holm, T., & Franke, J. (2021). Towards identifying and linking data silos along the software life cycle. In ICCSE 2021 - IEEE 16th International Conference on Computer Science and Education (pp. 138-143). Lancaster, GB: Institute of Electrical and Electronics Engineers Inc..
Martin, S., Gugel, L., Martin, T., Preis, A., Reitelshöfer, S., & Franke, J. (2021). Cost-efficient, true silicone printer with variable material spectrum for individualized medical applications. Procedia CIRP, 104, 435-439. https://doi.org/10.1016/j.procir.2021.11.073
Martin, S., Himmler, M., Bruns, A., Reitelshöfer, S., Pham, D.H.H., Schubert, D.W., & Franke, J. (2021). Electrical and mechanical characterization of medical grade silicones as dielectric layers in aerosol jet printed dielectric elastomers. In Iain A. Anderson, Herbert R. Shea, John D. W. Madden (Eds.), Proceedings Volume 11587, Electroactive Polymer Actuators and Devices (EAPAD) XXIII (pp. 13). Online, US: SPIE.
Martin, S., Kaßner, S., Bruns, A., Schärfe, P., Reitelshöfer, S., & Franke, J. (2021). Automated electrical characterization setup for aerosol-jet-printed dielectric elastomer transducers. In Proceedings of the Online international conference on Electromechanically Active Polymer (EAP) transducers & artificial muscles. Online.
Martin, S., Reitelshöfer, S., & Franke, J. (2021). Stretchable, multi-modal sensors for vital data monitoring and healthcare applications. Frankfurt: Deutscher Fachverlag GmbH.
Martin, S., Schieber, M., Reitelshöfer, S., Pham, D.H.H., & Franke, J. (2021). Novel measurement setup for dielectric elastomer sensors enabling the detection of multiple load scenarios with integrated adjustment for scalable sensor sizes. In Iain A. Anderson, Herbert R. Shea, John D. W. Madden (Eds.), Proc. SPIE 11587, Electroactive Polymer Actuators and Devices (EAPAD) XXIII, (pp. 10). Online: SPIE.
Martin, S., Schwab, J., Caballero Lopez, P., Benke, E., Reitelshöfer, S., & Franke, J. (2021). Mechanical modifications of soft actuators for the use as a dynamic iris implant. In Proceedings of the 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC) (pp. 4709-4712).
Mayer, E., Stichel, T., Roth, S., Neermann, S., Franke, J., & Schmidt, M. (2021). Generation of Printed Electronics on Thermal Sensitive Substrates by Laser Assisted Sintering of Nanoparticle Inks. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc..
Mayr, A., Röll, P., Winkle, D., Enzmann, M., Bickel, B., & Franke, J. (2021). Data-driven quality monitoring of bending processes in hairpin stator production using machine learning techniques. In Khaled Medini, Thorsten Wuest (Eds.), Procedia CIRP (pp. 256-261). Virtual, Online: Elsevier B.V..
Meiners, M., Kuhn, M., & Franke, J. (2021). Manufacturing process curve monitoring with deep learning. Manufacturing Letters, 30, 15-18. https://doi.org/10.1016/j.mfglet.2021.09.006
Meiners, M., Mayr, A., & Franke, J. (2021). Process curve analysis with machine learning on the example of screw fastening and press-in processes. Procedia CIRP, 97, 166-171. https://doi.org/10.1016/j.procir.2020.05.220
Metzner, M., Albrecht, F., Fiegert, M., Bauer, B., Martin, S., Karlidag, E.,... Franke, J. (2021). Virtual training and commissioning of industrial bin picking systems using synthetic sensor data and simulation (IMS 2019). International Journal of Computer Integrated Manufacturing. https://doi.org/10.1080/0951192X.2021.2004618
Neermann, S., Franke, J., Sippel, M., Lomakin, K., & Gold, G. (2021). Reliability of Printed Microwave Electronics. In IEEE 71ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2021) (pp. 1791-1796). , ELECTR NETWORK: LOS ALAMITOS: IEEE COMPUTER SOC.
Neermann, S., Franke, J., Sippel, M., Lomakin, K., & Gold, G. (2021). RF Characterization of the Homogeneity of Sintered Micro- And Nanoparticle Silver Inks for Printed Electronics. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc..
Nguyen, H.G., & Franke, J. (2021). Deep learning-based optical inspection of rigid and deformable linear objects in wiring harnesses. Procedia CIRP, 104, 1765-1770. https://doi.org/10.1016/j.procir.2021.11.297
Nguyen, H.G., Kuhn, M., & Franke, J. (2021). Manufacturing automation for automotive wiring harnesses. Procedia CIRP, 97, 379-384. https://doi.org/10.1016/j.procir.2020.05.254
Preis, A., Riedle, H., Benke, E., & Franke, J. (2021). Matching of Mechanical Properties of Biological Tissues and Technical Materials for the Fabrication of Anatomical Models by Material Jetting. In Proceedings of the 14th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 1: BIODEVICES (pp. 189-194). Virtuell.
Raffin, T., Mayr, A., Fuchs, J., Baader, M., Morello, A., Kühl, A., & Franke, J. (2021). A Microservice-Based Architecture for Flexible Data Acquisition at the Edge in the Context of Hairpin Stator Production. In IEEE (Eds.), Proceedings of the 2021 11th International Electric Drives Production Conference (EDPC). Erlangen, DE.
Reitelshöfer, S., Merz, N., Blank, A., Kedilioglu, O., Martin, S., Seßner, J., & Franke, J. (2021). Roboter werden biomechatronische Assistenten. München: MuP Verlag GmbH.
Riedel, A., Hahn, R., Kühl, A., & Franke, J. (2021). Evaluation of different methods for removing the conductor insulation of stranded conductors. In 12th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2021. Bucharest, RO: Institute of Electrical and Electronics Engineers Inc..
Riedel, A., Seefried, J., Schmidt, A., Kühl, A., & Franke, J. (2021). Experimental Setup of a Process Chain for Contacting Litz Wires for Electrical Drives. In 30th International Conference on Electrical Contacts, ICEC 2020 - Proceedings (pp. 607-614). Virtual: Electrosuisse, Verband fur Elektro-, Energie und Informationstechnik.
Roudenko, J., Neermann, S., Schirmer, J., Reichenberger, M., & Franke, J. (2021). Sintering of digitally printed silver nanoparticle inks on flexible and rigid substrates by NIR- And UVradiation. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc..
Russwurm, E., Faltus, F., & Franke, J. (2021). Systems Engineering als Basis für konstruktionsbegleitende Zusammenarbeit. In Liu-Henke X, Durak U (Herausgeber) (Hrg.), Tagungsband Virtueller ASIM Workshop 2021 Simulation Technischer Systeme. Grundlagen und Methoden in Modellbildung und Simulation & Edukation und Simulation. Wien: ARGESIM Verlag.
Russwurm, E., Faltus, F., Laukotka, F., Schwan, L., Brossog, M., Krause, D., & Franke, J. (2021). Methodik zur frühzeitigen Integration prozessspezifischer Einflussfaktoren aus der automatisierten Montage in die Auslegung funktionskritischer Komponenten. In Dieter Krause, Kristin Paetzold, Sandro Wartzack (Eds.), Proceedings of the 32nd Symposium Design for X, DFX 2021. Online: The Design Society.
Schirmer, J., Huemmer, M., Klauss, M., Neermann, S., Reichenberger, M., & Franke, J. (2021). Evaluation of detatchable board-to-board interconnects on screen printed electronic structures. Flexible and Printed Electronics, 6(3). https://doi.org/10.1088/2058-8585/ac1fd5
Schirmer, J., Reichenberger, M., Neermann, S., & Franke, J. (2021). Conformable Electronics: Thermoforming and Injection Molding of Electronic Components. In Proceedings of the International Spring Seminar on Electronics Technology. Bautzen, DE: IEEE Computer Society.
Schirmer, J., Reichenberger, M., Wimmer, A., Reichel, H., Neermann, S., & Franke, J. (2021). Evaluation of Mechanical Stress on Electronic Assemblies during Thermoforming and Injection Molding for Conformable Electronics. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc..
Schmidl, E., Wenk, M., Russwurm, E., & Franke, J. (2021). Interoperabilität realer und simulierter Produktionssysteme mittels OPC UA. In Franke J, Schuderer P (Herausgeber) (Hrg.), Simulation in Produktion und Logistik 2021. (S. 495 - 504). Göttingen: Cuvillier Verlag.
Schmidt, K., Rauchensteiner, D., Voigt, C., Thielen, N., Bönig, J., Beitinger, G., & Franke, J. (2021). An Automated Optical Inspection System for PIP Solder Joint Classification Using Convolutional Neural Networks. In IEEE (Eds.), IEEE (pp. 2205 - 2210). San Diego, CA, US.
Schäffer, E., Mayr, A., Reichenstein, T., Shafiee, S., & Franke, J. (2021). Four Independent Knowledge Domains to Enable an Agile, Distributed Development of User-Centred Engineering Configurators. Procedia CIRP, 103, 134-139. https://doi.org/10.1016/j.procir.2021.10.021
Schäffer, E., Metzner, M., Pawlowskij, D., & Franke, J. (2021). Seven Levels of Detail to structure use cases and interaction mechanism for the development of industrial Virtual Reality applications within the context of planning and configuration of robot-based automation solutions. In Karel Kellens, Eleonora Ferraris, Eric Demeester (Eds.), Procedia CIRP (pp. 284-289). Leuven, BE: Elsevier B.V..
Schäffer, E., Penczek, L., Bartelt, M., Brossog, M., Kuhlenkötter, B., & Franke, J. (2021). A Microservice- and AutomationML-based Reference Architecture for an Engineering Configurator Web Platform. In Proceedings of the 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19 (pp. 274--279). Elsevier.
Schäffer, E., Schobert, M., Reichenstein, T., Selmaier, A., Stiehl, V., Herhoffer, M.,... Franke, J. (2021). Reference Architecture and Agile Development Method for a Process-Driven Web Platform based on the BPMN-Standard and Process Engines. In CIRPe (Eds.), CIRPe 2021 Sustainable, resilient, and agile manufacturing and service operations: Lessons from COVID-19. (pp. 146--151).
Schäffer, E., Shafiee, S., Mayr, A., & Franke, J. (2021). A strategic approach to improve the development of use-oriented knowledge-based engineering configurators (KBEC). Procedia CIRP, 96, 219-224. https://doi.org/10.1016/j.procir.2021.01.078
Schäffer, E., Stiehl, V., Schwab, P., Mayr, A., Lierhammer, J., & Franke, J. (2021). Process-Driven Approach within the Engineering Domain by Combining Business Process Model and Notation (BPMN) with Process Engines. Procedia CIRP, 96, 207-212. https://doi.org/10.1016/j.procir.2021.01.076
Seefried, J., Mahr, A., Weigelt, M., Kühl, A., & Franke, J. (2021). Challenges of Contacting Processes for Thin Copper Flat Wires in the Context of Electromechanical Engineering. In 2021 11TH INTERNATIONAL ELECTRIC DRIVES PRODUCTION CONFERENCE (EDPC) (pp. 198-205). , ELECTR NETWORK: NEW YORK: IEEE.
Seefried, J., Riedel, A., Lohbauer, A., Baessler, H., Kühl, A., & Franke, J. (2021). Influencing Factors for the Ultrasonic Compacting Process of Insulated Litz Wires for Electric Drives. In 30th International Conference on Electrical Contacts, ICEC 2020 - Proceedings (pp. 599-606). Online, CH: Electrosuisse, Verband fur Elektro-, Energie und Informationstechnik.
Seidel, R., Sippel, M., & Franke, J. (2021). An Analytical Approach to Thermal Design for Manufacturing in Mini Wave Soldering. In IEEE 71ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2021) (pp. 1427-1434). , ELECTR NETWORK: LOS ALAMITOS: IEEE COMPUTER SOC.
Selmaier, A., Lutz, B., Kißkalt, D., Boernicke, S., Fuerst, J., & Franke, J. (2021). Semantic Segmentation of Multi-Channel Polycrystalline Structure Micrographs Using Convolutional Neural Networks. In 20TH IEEE INTERNATIONAL CONFERENCE ON MACHINE LEARNING AND APPLICATIONS (ICMLA 2021) (pp. 847-852). , ELECTR NETWORK: NEW YORK: IEEE.
Selmaier, A., Sjarov, M., Herbert, M., Distler, J., Fürst, J., & Franke, J. (2021). Der Digitale Zwilling als echtzeitnahes Fertigungsabbild. In Jörg Franke, Peter Schuderer (Hrg.), Simulation in Produktion und Logistik 2021 (S. 31-40). Erlangen: Göttingen: Cuvillier Verlag.
Sitz, S., Zerreis, M., Lechler, T., & Franke, J. (2021). Einsatz der ereignisdiskreten Materialflusssimulation bei Methoden aus der kontinuierlichen Verbesserung im Produktionsumfeld: Erfolg und Auswirkungen der Speedweek 4.0. In Jörg Franke, Peter Schuderer (Eds.), Simulation in Produktion und Logistik 2021 (pp. 143-156). Göttingen: Cuvillier Verlag.
Sjarov, M., & Franke, J. (2021). Towards Knowledge Graphs for Industrial End-To-End Data Integration: Technologies, Architectures and Potentials. In Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis (Eds.), Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP) (pp. 545-553). Dresden, DE: Springer Link.
Sjarov, M., Kißkalt, D., Lechler, T., Selmaier, A., & Franke, J. (2021). Towards “Design for Interoperability” in the context of Systems Engineering. Procedia CIRP, 96, 145-150. https://doi.org/10.1016/j.procir.2021.01.067
Sjarov, M., Lechler, T., Russwurm, E., Fuchs, J., Faltus, F., Schäffer, E.,... Franke, J. (2021). Life Cycle of a Digital Resource Twin: Meta-Modeling and Application Example. Procedia CIRP, 104, 1644-1649. https://doi.org/10.1016/j.procir.2021.11.277
Teske, F., Fehrle, A., Praß, J., & Franke, J. (2021). Adapted pricing scheme for the integration of vehicle-to-grid into the energy system. In Proceedings of the 11th International Electric Drives Production Conference (EDPC). Erlangen, DE.
Teske, F., Funk, F., Fehrle, A., & Franke, J. (2021). Integration of electric vehicles into low-voltage grids with limited capacity using a smart market. In IEEE (Eds.), Proceedings of the 2021 11th International Electric Drives Production Conference (EDPC). Erlangen, DE.
Teske, F., Wittl, I., Funk, F., Fehrle, A., & Franke, J. (2021). A Design for an Urban Electricity Market to Reduce the Expansion of the Low Voltage Distribution Grid. In Proceedings of the 2021 IEEE Electrical Power and Energy Conference (EPEC). Toronto.
Thielen, N., Jiang, Z., Schmidt, K., Seidel, R., Voigt, C., Reinhardt, A., & Franke, J. (2021). Clustering of Image Data to Enhance Machine Learning Based Quality Control in THT Manufacturing. In 2021 IEEE 27TH INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY IN ELECTRONIC PACKAGING (SIITME 2021) (pp. 287-291). Timisoara, RO: NEW YORK: IEEE.
Urban, N., Masuch, M., Paduch, J., & Franke, J. (2021). An Approach to Eddy Current Reduction in Laser Powder Bed Fused High Silicon Steel Considering Manufacturing Influences. In 2021 11TH INTERNATIONAL ELECTRIC DRIVES PRODUCTION CONFERENCE (EDPC) (pp. 92-96). NEW YORK: IEEE.
Voigt, C., Hagag, A., Kirchberger, M., & Franke, J. (2021). Evaluation of Influences on Accuracy of Radiographic Measurements of Solder Joint Volume. In Proceedings of the International Spring Seminar on Electronics Technology. Bautzen, DEU: IEEE Computer Society.
Voigt, C., Harnecker, L., Kirchberger, M., & Franke, J. (2021). An Analysis of Redundancy in High Volume High Mix Quality Testing Systems in Electronics Production. In Proceedings of the International Spring Seminar on Electronics Technology. Bautzen, DEU: IEEE Computer Society.
Wang, L., Lomakin, K., Job, A., Süß-Wolf, R., Gold, G., & Franke, J. (2021). Simulation Assisted Characterization of Attenuation at Microstrip Transmission Lines fabricated by Laser Direct Structuring. In 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Virtual, DE: Institute of Electrical and Electronics Engineers Inc..
Ziegler, M., Brandl, F., Kühl, A., & Franke, J. (2021). Evaluation of Laser-welded Electrical Steel Laminations for Electric Motors. In 12th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2021. Bucharest, RO: Institute of Electrical and Electronics Engineers Inc..
Zwingel, M., Baier, L., Blank, A., & Franke, J. (2021). Hierarchical And Flexible Navigation For AGVs In Autonomous Mixed Indoor And Outdoor Operation. In Herberger, D.; Hübner, M. (Eds.), Proceedings of the 2nd Conference on Production Systems and Logistics (CPSL 2021) (pp. 146-155). online: Hannover: Institutionelles Repositorium der Leibniz Universität Hannover.

Backhaus, C., Hoffmann, G.-A., Reitberger, T., Eiche, Y., Overmeyer, L., Franke, J., & Lindlein, N. (2020). Analysis of additive manufactured polymer optical waveguides: measurement and simulation of their waviness. In García-Blanco SM, Cheben P (Eds.), Integrated Optics: Devices, Materials, and Technologies XXIV (pp. 193 -- 202). San Francisco, California, United States, US: SPIE.
Bakakeu, J., Kißkalt, D., Franke, J., Baer, S., Klos, H.H., & Peschke, J. (2020). Multi-Agent Reinforcement Learning for the Energy Optimization of Cyber-Physical Production Systems. In Canadian Conference on Electrical and Computer Engineering. London, ON, CA: Institute of Electrical and Electronics Engineers Inc..
Bakakeu, J., Schäfer, F., Franke, J., Baer, S., Klos, H.H., & Peschke, J. (2020). Reasoning over OPC UA Information Models using Graph Embedding and Reinforcement Learning. In Proceedings - 2020 3rd International Conference on Artificial Intelligence for Industries, AI4I 2020 (pp. 40-47). Irvine, CA, US: Institute of Electrical and Electronics Engineers Inc..
Baloglu, M.V., Ziegler, M., Franke, J., & Willner, K. (2020). Determination of equivalent transversely isotropic material parameters for sheet-layered lamination stacks. Mechanical Systems and Signal Processing, 145. https://doi.org/10.1016/j.ymssp.2020.106915
Bauer, J., Hechtel, M., Konrad, C., Holzwarth, M., Hoffmann, H., Feld, T.,... Franke, J. (2020). ForeSight - An AI-driven Smart Living Platform, Approach to Add Access Control to openHAB. In Mohamed Jmaiel, Hamdi Aloulou, Mounir Mokhtari, Bessam Abdulrazak, Slim Kallel (Eds.), Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (pp. 432-440). Hammamet, TN: Springer.
Bauer, J., Hechtel, M., Konrad, C., Holzwarth, M., Mayr, A., Schneider, S.,... Hinz, O. (2020). ForeSight-AI-based Smart Living Platform Approach. Current Directions in Biomedical Engineering, 6(3). https://doi.org/10.1515/cdbme-2020-3099
Bauer, J., Wittenberg, T., Waldhör, K., Hechtel, M., Holzwarth, M., Seßner, J.,... Franke, J. (2020). A Concept for Context Awareness in SmartEnvironments. Current Directions in Biomedical Engineering. https://doi.org/10.1515/cdbme-2020-3098
Benke, E., Fehrle, A., Ollech, J., Schrampfer, S., & Franke, J. (2020). Architecture and low power management of a deep-tissue medical implant system powered by human body energy harvesting. In Ye Xuesong, Ana Fred, Hugo Gamboa (Eds.), BIODEVICES 2020 - 13th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 13th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2020 (pp. 227-234). Valletta, MT: SciTePress.
Blank, A., Berg, J., Zikeli, G.L., Lu, S., Sommer, O., Reinhart, G., & Franke, J. (2020). Entstörungsstrategie für autonome mobile Roboter Intervention strategy for autonomous mobile robots. wt Werkstattstechnik - Online, 110(9), 601-606. https://doi.org/10.37544/1436-4980-2020-09-43
Blank, A., Berg, J., Zikeli, G.L., Lu, S., Sommer, O., Reinhart, G., & Franke, J. (2020). Entstörungsstrategie für autonome mobile Roboter/Intervention strategy for autonomous mobile robots. wt Werkstattstechnik - Online, 110(9), 613-618. https://doi.org/10.37544/1436-4980-2020-09-43
Blank, A., Havenith, A., Kohn, S., Querfurth, F., Zwingel, M., Metzner, M., & Franke, J. (2020). Robotic Technologies for Volume-Optimized Conditioning of Radioactive Waste – VIRERO. In AiNT GmbH (Eds.), ICOND 2020 Conference Proceedings. Aachen, Germany, DE.
Bodendorf, F., & Franke, J. (2020). Risk Assessment of Vehicle Sensor Data as a Vending Object or Service. In Wei Song, Kisung Lee, Zhisheng Yan, Liang-Jie Zhang, Huan Chen (Eds.), Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (pp. 141-151). Honolulu, HI, US: Springer Science and Business Media Deutschland GmbH.
Bodendorf, F., & Franke, J. (2020). Technology-Based Lifecycle Assessment of Software Components in Automotive Product Planning. In Beata Mrugalska, Stefan Trzcielinski, Waldemar Karwowski, Massimo Di Nicolantonio, Emilio Rossi (Eds.), Advances in Intelligent Systems and Computing (pp. 287-293). San Diego, CA, US: Springer.
Bodendorf, F., Hollweck, B., & Franke, J. (2020). Technologieorientierte Softwarebewertung zur Unterstützung von Beschaffungsentscheidungen. Controlling, 32(2), 53-61. https://doi.org/10.15358/0935-0381-2020-2-53
Bräuer, P., Wurzer, L., Kuhn, T., Knoeller, A., Mueller, H., Eberhardt, W.,... Franke, J. (2020). Reliability of Mechatronic Integrated Devices Regarding Failure Mechanisms. In 2020 43RD INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE). NEW YORK: IEEE.
Deuerlein, C., Langer, M., Seßner, J., Heß, P., & Franke, J. (2020). Human-robot-interaction using cloud-based speech recognition systems. In Sotiris Makris (Eds.), Procedia CIRP (pp. 130-135). Athens, GR: Elsevier B.V..
Donhauser, T., Endter, U., Schmidt, T., Baier, L., Schuderer, P., & Franke, J. (2020). Echtzeitabbild der Produktion: Betriebsbegleitende Materialflusssimulation. wt Werkstattstechnik - Online, 110(4), 214--219. https://doi.org/10.37544/1436-4980-2020-04-48
Donhauser, T., Endter, U., Schmidt, T., Baier, L., Schuderer, P., & Franke, J. (2020). Real-time image of production. Material flow simulation during operation Betriebsbegleitende materialflusssimulation echtzeitabbild der produktion. wt Werkstattstechnik - Online, 110(4), 214-219.
Fehrle, A., Benke, E., Braun, T., Dorscht, F., Hart, M., & Franke, J. (2020). Architektur und Low-Power-Konzept für eine vernetzte Sensorplattform zur Erzeugung eines behaglichen und energieeffizienten Smart-Home-Umfeldes. In Proceedings of the 10. GMM-Fachtagung Energie Autonome Sensorsysteme EASS 2020. Karlsruhe.
Fröhlich, J., Gräf, D., Franke, J., Hörber, J., & Hedges, M. (2020). Customizable Capacitive Sensor System Using Printed Electronics on Window Glass. In Proceedings of the 2020 Pan Pacific Microelectronics Symposium. Kohala Coast, HI, US: Institute of Electrical and Electronics Engineers Inc..
Fröhlig, S., Piechulek, N., Friedlein, M., Süß-Wolf, R., Schmidt, L., Kuhn, M.,... Franke, J. (2020). Innovative signal and power connection solutions for alternative powertrain concepts. In 2020 10th International Electric Drives Production Conference (EDPC). IEEE.
Geiger, M., Bauer, J., Masuch, M., & Franke, J. (2020). An Analysis of Black Energy 3, Crashoverride, and Trisis, Three Malware Approaches Targeting Operational Technology Systems. In IEEE (Eds.), 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Vienna, Austria: NY, USA: IEEE.
Gläßel, T., Masuch, M., Weigelt, M., Kühl, A., & Franke, J. (2020). Schlussbericht zu dem Teilvorhaben "Automatisierte Fertigungstechnologien zum Biegen, Montieren und Schalten von innovativen Formspulenwicklungen" im Verbundprojekt "PRO-E-Traktion". Zenodo.
Gläßel, T., Seefried, J., Kühl, A., & Franke, J. (2020). Skinning of insulated copper wires within the production chain of hairpin windings for electric traction drives. International Journal of Mechanical Engineering and Robotics Research, 9(2), 163-169. https://doi.org/10.18178/ijmerr.9.2.163-169
Gräf, D., Friedlein, M., Gänßmantel, C., Franke, J., & Ischdonat, N. (2020). New concept for the Integration of Additive Manufactured Mechanical and Mechatronic Components in Aircraft Interior Systems. In Proceedings of the 2020 Advances in Science and Engineering Technology International Conferences (ASET). Dubai, AE.
Hefner, F., Praß, J., Kirchner, P., & Franke, J. (2020). Design of process parameters for the manufacturing of wrapped connections with single solid round wires using the explicit finite element analysis. Procedia CIRP, 91, 684 - 689. https://doi.org/10.1016/j.procir.2020.02.225
Hefner, F., Schmidbauer, S., & Franke, J. (2020). Pose error correction of a robot end-effector using a 3D visual sensor for control cabinet wiring. In Robert X. Gao, Kornel Ehmann (Eds.), Procedia CIRP (pp. 1133-1138). Chicago, IL, US: Elsevier B.V..
Hefner, F., Schmidbauer, S., & Franke, J. (2020). Vision-based adjusting of a digital model to real-world conditions for wire insertion tasks. In Sotiris Makris (Eds.), Procedia CIRP (pp. 342-347). Athens, IT: Elsevier B.V..
Heisler, P., Hausecker, E., Regler, J., Süß-Wolf, R., & Franke, J. (2020). Development and Validation of a Material Application Tool for the Covering Process of a Wire Harness. In 2020 10th International Electric Drives Production Conference, EDPC 2020 - Proceedings. Virtual, Ludwigsburg, DEU: Institute of Electrical and Electronics Engineers Inc..
Heisler, P., Kuhn, M., Süß-Wolf, R., & Franke, J. (2020). Innovative Solutions for the Covering Process in the Manufacturing of Wire Harnesses to Increase the Automation Degree. In IEEE (Eds.), Proceedings of the 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT). Kapstadt, ZA.
Heisler, P., Utsch, D., Kuhn, M., & Franke, J. (2020). Optimization of wire harness assembly using human-robot-collaboration. In Sotiris Makris (Eds.), Procedia CIRP (pp. 260-265). Athens, IT: Elsevier B.V..
Herbert, M., Selmaier, A., Hefner, F., & Franke, J. (2020). Potenziale zur Produktionsautomatisierung. Systematische Vorgehensweise zur Identifikation von Automatisierungsprojekten. wt Werkstattstechnik - Online, 110(9), 597-601.
Hoffmann, G.A., Wienke, A., Reitberger, T., Franke, J., Kaierle, S., & Overmeyer, L. (2020). Thermoforming of planar polymer optical waveguides for integrated optics in smart packaging materials. Journal of Materials Processing Technology, 285. https://doi.org/10.1016/j.jmatprotec.2020.116763
Häußler, F., Petillon, S., Dornheim, J., Weser, S., Eberhardt, W., Zimmermann, A., & Franke, J. (2020). Solderability of Injection Moldable Thermoset Resins for Use in 3D Mechatronic Integrated Devices. In 2020 43RD INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE). Demanovska Valley, Slovakia: NEW YORK: IEEE.
Häußler, F., Shen, S., Petillon, S., Weser, S., Haybat, M., Eberhardt, W.,... Franke, J. (2020). Evaluating thermoset resin substrates for 3D mechatronic integrated devices and packaging. International Symposium on Microelectronics, 2020, 000140-000145. https://doi.org/10.4071/2380-4505-2020.1.000140
Kißkalt, D., Mayr, A., Lutz, B., Rögele, A., & Franke, J. (2020). Streamlining the development of data-driven industrial applications by automated machine learning. In Robert X. Gao, Kornel Ehmann (Eds.), Procedia CIRP (pp. 401-406). Chicago, IL, US: Elsevier B.V..
Kuhn, M., & Franke, J. (2020). Smart Manufacturing Traceability for Automotive E/E Systems enabled by Event-Driven Microservice Architecture. In Proceedings of the 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (pp. 142-148). Cape Town, ZA.
Lechler, T., Fuchs, J., Sjarov, M., Brossog, M., Selmaier, A., Faltus, F.,... Franke, J. (2020). Introduction of a comprehensive Structure Model for the Digital Twin in Manufacturing.
Lechler, T., Hocke, G., Geier, J., Sitz, S., Reinhard, M., & Franke, J. (2020). Effizientes Engineering - Durchgängiger Simulationseinsatz in der Entwicklung von Sondermaschinen. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115(11), 774-778. https://doi.org/10.3139/104.112457
Lechler, T., Krem, G., Metzner, M., Sjarov, M., & Franke, J. (2020). Simulation-Based Robot Placement Using a Data Farming Approach. In Bernd-Arno Behrens; Alexander Brosius; Wolfgang Hintze; Steffen Ihlenfeldt; Jens Peter Wulfsberg (Eds.), Production at the leading edge of technology. (pp. 419-428).
Lechler, T., Zerreis, M., Sitz, S., Reinhard, M., & Franke, J. (2020). Simulation hochautomatisierter Serienproduktion - Produktivitätssteigerung im Ramp-Down. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115(3), 123 - 126. https://doi.org/10.3139/104.112248
Lieret, M., Fertsch, J., & Franke, J. (2020). Fault detection for autonomous multirotors using a redundant flight control architecture. In IEEE International Conference on Automation Science and Engineering (pp. 29-34). Hong Kong, HKG: IEEE Computer Society.
Lieret, M., Lallinger, M., Tauscher, M., & Franke, J. (2020). Localization and grasping of small load carriers with autonomous unmanned aerial vehicles. In Annals of Scientific Society for Assembly, Handling and Industrial Robotics (pp. 241-250). Berlin, Heidelberg: Springer Vieweg.
Lieret, M., Lukas, J., Nikol, M., & Franke, J. (2020). A lightweight, low-cost and self-diagnosing mechatronic jaw gripper for the aerial picking with unmanned aerial vehicles. Procedia Manufacturing, 51, 424-430. https://doi.org/10.1016/j.promfg.2020.10.060
Lipka, M., Meinel, D., Müller, S., Sippel, E., Franke, J., & Vossiek, M. (2020). A Wireless Angle and Position Tracking Concept for Live Data Control of Advanced, Semi-Automated Manufacturing Processes. Sensors, 2589. https://doi.org/10.3390/s20092589
Lomakin, A., Mayr, A., Graichen, K., & Franke, J. (2020). Optimization of direct winding processes based on a holistic control approach. In Proceedings of the Electric Drives Production Conference (E-DPC). Ludwigsburg (D).
Lorenz, L., Hanesch, F., Nieweglowski, K., Eiche, Y., Franke, J., Hoffmann, G.A.,... Bock, K. (2020). 3D-Opto-MID for asymmetric optical bus couplers. In Proceedings - 2020 IEEE 8th Electronics System-Integration Technology Conference, ESTC 2020. Tonsberg, Vestfold, NO: Institute of Electrical and Electronics Engineers Inc..
Lorenz, L., Nieweglowski, K., Al-Husseini, Z., Neumann, N., Plettemeier, D., Reitberger, T.,... Bock, K. (2020). Aerosol Jet Printed Optical Waveguides for Short Range Communication. Journal of Lightwave Technology, 38(13), 3478-3484. https://doi.org/10.1109/JLT.2020.2983792
Lutz, B., Kißkalt, D., Mayr, A., Regulin, D., Pantano, M., & Franke, J. (2020). In-situ identification of material batches using machine learning for machining operations. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-020-01718-3
Lutz, B., Kißkalt, D., Regulin, D., & Franke, J. (2020). AI-based approach for predicting the machinability under consideration of material batch deviations in turning processes. Procedia CIRP, 93(53rd CIRP Conference on Manufacturing Systems 2020), 1382-1387. https://doi.org/10.1016/j.procir.2020.04.100
Lutz, B., Reisch, R., Kißkalt, D., Avci, B., Regulin, D., Knoll, A., & Franke, J. (2020). Benchmark of automated machine learning with state-of-the-art image segmentation algorithms for tool condition monitoring. Procedia Manufacturing, 51, 215-221. https://doi.org/10.1016/j.promfg.2020.10.031
Mayr, A., Hauck, L., Meiners, M., & Franke, J. (2020). Prediction of the Joint Cross-Section of Laser-Welded Hairpin Windings Based on 2D Image Data Using Convolutional Neural Networks. In 10th International Electric Drives Production Conference (EDPC) (pp. 1-7). Virtual, Ludwigsburg, DE: Institute of Electrical and Electronics Engineers Inc..
Mayr, A., Kißkalt, D., Lomakin, A., Graichen, K., & Franke, J. (2020). Towards an intelligent linear winding process through sensor integration and machine learning techniques. In Proceedings of the 8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020).
Meiners, M., & Franke, J. (2020). Concept of a Machine Learning supported Cross-Machine Control Loop in the Ramp-Up of Large Series Manufacturing. In Proceedings of the 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies. Cape Town.
Meiners, M., Mayr, A., Kuhn, M., Raab, B., & Franke, J. (2020). Towards an Inline Quality Monitoring for Crimping Processes Utilizing Machine Learning Techniques. In 2020 10th International Electric Drives Production Conference, EDPC 2020 - Proceedings. Ludwigsburg, DE: Institute of Electrical and Electronics Engineers Inc..
Meiners, M., Mayr, A., Thomsen, M., & Franke, J. (2020). Application of Machine Learning for Product Batch Oriented Control of Production Processes. Procedia CIRP, 93, 431-436. https://doi.org/10.1016/j.procir.2020.04.006
Meiners, M., Reichenstein, T., Franke, J., & Hauenstein, R. (2020). Current Distribution Monitoring in Capacitor Discharge Welding.
Merkl, R., Steglich, M., Paulsburg, M., Rehtanz, C., & Franke, J. (2020). Aggregated power quality indicator for controlling a hybrid compensation system providing system services. In IEEE PES Innovative Smart Grid Technologies Conference Europe (pp. 700-704). Delft, NL: IEEE Computer Society.
Merz, N., Huber, M., Bodendorf, F., & Franke, J. (2020). Science-Fiction Movies as an Indicator for User Acceptance of Robots in a Non-Industrial Environment. In SIGMIS-CPR 2020 - Proceedings of the 2020 Computers and People Research Conference (pp. 142-143). Nuremberg, DEU: Association for Computing Machinery, Inc.
Metzner, M., Krieg, L., Krüger, D., Ködel, T., & Franke, J. (2020). Intuitive, VR- and Gesture-based Physical Interaction with Virtual Commissioning Simulation Models. In Annals of Scientific Society for Assembly, Handling and Industrial Robotics. (pp. 11-20).
Metzner, M., Leurer, S., Handwerker, A., Karlidag, E., Blank, A., Hefner, F., & Franke, J. (2020). High-precision assembly of electronic devices with lightweight robots through sensor-guided insertion. In Sotiris Makris (Eds.), Procedia CIRP (pp. 337-341). Athens, GR: Elsevier B.V..
Metzner, M., Utsch, D., Walter, M., Hofstetter, C., Ramer, C., Blank, A., & Franke, J. (2020). A system for human-in-the-loop simulation of industrial collaborative robot applications. In IEEE International Conference on Automation Science and Engineering (pp. 1520-1525). Hong Kong, HK: IEEE Computer Society.
Neermann, S., Steindl, M., Franke, J., Mayer, E., & Schmidt, M. (2020). Qualification of NIR, UV and Laser Irradiation as Alternative Photonic Sintering Methods for Printed Electronics. In 2020 Pan Pacific Microelectronics Symposium. Kohala Coast, HI, US: Institute of Electrical and Electronics Engineers Inc..
Nguyen, H.G., Meiners, M., Schmidt, L., & Franke, J. (2020). Deep learning-based automated optical inspection system for crimp connections. In 2020 10th International Electric Drives Production Conference (EDPC).
Reitelshöfer, S., Martin, S., Nendel, F., Schäfer, T., Pham, D.H.H., & Franke, J. (2020). Accelerated aerosol-jet-printing of stretchable rGO-electrodes for stacked dielectric elastomers by using a new hybrid atomizer. In Yoseph Bar-Cohen, Iain A. Anderson, Herbert R. Shea (Eds.), Proceedings of SPIE - The International Society for Optical Engineering. ONLINE: SPIE.
Riedle, H., Chaban, R., Ghazy, A., Piplat, C., Dorweiler, B., & Franke, J. (2020). Experimental determination of the suture behavior of aortic tissue in comparison to 3D printed silicone modelling material. Journal of the Mechanical Behavior of Biomedical Materials, 112. https://doi.org/10.1016/j.jmbbm.2020.104033
Riedle, H., Ghazy, A., Seufert, A., Seitz, V., Dorweiler, B., & Franke, J. (2020). Generic design of an anatomical heart model optimized for additive manufacturing with silicone. Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-11-2019-0283
Rupp, S., Müller, R., Kerker, S., Faltus, F., & Franke, J. (2020). Problemmanagement in Werker-Assistenz-Systemen. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115(1). https://doi.org/10.3139/104.112244
Schmidl, E., Fischer, E., Steindl, J., Wenk, M., & Franke, J. (2020). Reinforcement learning for energy reduction of conveying and handling systems. In Sotiris Makris (Eds.), Procedia CIRP (pp. 290-295). Athens, IT: Elsevier B.V..
Schmidl, E., Fischer, E., Wenk, M., & Franke, J. (2020). Knowledge-based generation of a plant-specific reinforcement learning framework for energy reduction of production plants. In IEEE International Conference on Emerging Technologies and Factory Automation, ETFA (pp. 441-446). Vienna, AT: Institute of Electrical and Electronics Engineers Inc..
Schmidt, K., Bönig, J., Beitinger, G., Thielen, N., & Franke, J. (2020). Ein Ansatz zu Qualitätsvorhersage mittels intelligenter SMT-Lötstelleninspektion durch den Einsatz von Maschinellem Lernen. In VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM) (Hrg.), GMM-Fb. 94: EBL 2020 – Elektronische Baugruppen und Leiterplatten. Fellbach, DE: VDE Verlag.
Schmidt, K., Thielen, N., Voigt, C., Seidel, R., Franke, J., Milde, Y.,... Beitinger, G. (2020). Enhanced X-Ray Inspection of Solder Joints in SMT Electronics Production using Convolutional Neural Networks. In IEEE (Eds.), 2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME). Pitesti, RO.
Scholz, M., Kraus, P., & Franke, J. (2020). Development and implementation of a software layer for generic skill descriptions of versatile autonomous vehicles. In Roberto Teti, Doriana M. D'Addona (Eds.), Procedia CIRP (pp. 203-208). Naples, IT: Elsevier B.V..
Scholz, M., Steinkamp, J., Zwingel, M., Hefner, F., & Franke, J. (2020). Distributed Camera Architecture for Seamless Detection and Tracking of Dynamic Obstacles. In Khumbulani Mpofu, Peter Butala (Eds.), Procedia CIRP Volume 91 (pp. 342-347). Kruger National Park Skukuza Rest Camp, ZA: Science Direct.
Schwarzer, C., Chew, L.M., Stoll, T., Franke, J., & Kaloudis, M. (2020). A new development of micro-copper sinter material for high power electronics application. In CIPS 2020 - 11th International Conference on Integrated Power Electronics Systems (pp. 596-601). Berlin, DE: VDE Verlag GmbH.
Schwarzer, C., Hensel, A., Roth, F., Franke, J., & Kaloudis, M. (2020). Investigation of Pressureless Sintered Interconnections on Plasma Based Additive Copper Metallization for 3-Dimentional Ceramic Substrates for Surface Acoustic Wave Sensors in High Temperature Applications. In Proceedings - Electronic Components and Technology Conference (pp. 1592-1600). Orlando, FL, US: Institute of Electrical and Electronics Engineers Inc..
Schäfer, F., Mayr, A., Schwulera, E., & Franke, J. (2020). Smart use case picking with DUCAR: A hands-on approach for a successful integration of machine learning in production processes. In George-Christopher Vosniakos, Marcello Pellicciari, Panorios Benardos, Angelos Markopoulos (Eds.), Procedia Manufacturing (pp. 1311-1318). Athens, GR: Elsevier B.V..
Schäffer, E., Shafiee, S., Frühwald, T., & Franke, J. (2020). A development approach towards user-centered front-ends for knowledge-based engineering configurators: a study within planning of robot-based automation solutions. In Proceedings of the 22nd International Configuration Workshop. (pp. 47-52).
Schäffer, E., Thi, K., & Franke, J. (2020). Bedarf und Konzeptvorstellung des Forschungsprojekts ROBOTOP für einen webbasierten Konfigurator für den Massenmarkt.
Seidel, R., Hassan Amada, M., Fuchs, J., Thielen, N., Schmidt, K., Voigt, C., & Franke, J. (2020). Data Mining System Architecture for Industrial Internet of Things in Electronics Production. In IEEE (Eds.), 2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME). Pitesti, RO.
Seidel, R., Leibold, F., Thielen, N., & Franke, J. (2020). Prediction of the Solder Rise in Selective Wave Soldering Comparing Decision Tree and Logistic Regression.
Seidel, R., Thielen, N., Schmidt, K., Voigt, C., & Franke, J. (2020). Development and Test of a Data Framework for Prediction of Soldering Quality in Selective Wave Soldering Applying K-Nearest Neighbors. In IEEE (Eds.), 2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME). Pitesti, RO.
Seidel, R., Thielen, N., Voigt, C., & Franke, J. (2020). Thermische Beurteilung von THT-Lötstellendesigns für die IPC-konforme Kontaktierung durch Selektivwellenlöten. In Proceedings of the EBL 2020. Fellbach.
Seidel, R., Volland, J., Thielen, N., Voigt, C., & Franke, J. (2020). Experimental Investigation on Thermocouple Attachment Methods for Reliable Temperature Measurement. In Proceedings of the ISSE 2020.
Selmaier, A., Martens, B., Sjarov, M., Kuhn, M., Herbert, M., & Franke, J. (2020). Anwendung etablierter Vorgehensweisen der Softwareentwicklung in der produzierenden Industrie. Systematische Methoden - Auswahl bei der Digitalisierung. wt Werkstattstechnik - Online, 110(4), 226-230.
Selmaier, A., Martens, B., Sjarov, M., Kuhn, M., Herbert, M., & Franke, J. (2020). Systematische Methodenauswahl bei der Digitalisierung. Werkstattstechnik, WT WERKSTATTSTECHNIK BD. 110 (2020)(4 | 2020), 226-230.
Seßner, J., Schmid, M., Lauer-Schmalz, M., & Franke, J. (2020). Path Segmentation with Artificial Neural Networks in Low Structured Environments for the Navigation of Visually Impaired People. In Proceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics (pp. 1242-1247). New York City, NY, US: IEEE Computer Society.
Sitz, S., Lechler, T., Reinhard, M., & Franke, J. (2020). Vision oder Wirklichkeit: Digitale Zwillinge in der Kunststoffindustrie. Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen, 06/20, 32-36.
Sitz, S., Lechler, T., Reinhard, M., & Franke, J. (2020). Vision oder Wirklichkeit: Digitale Zwillinge in der Kunststoff- und Kautschukindustrie. Kgk-Kautschuk Gummi Kunststoffe, 12-16.
Sjarov, M., Ceriani, N., Lechler, T., & Franke, J. (2020). Building Blocks for Digitally Integrated Process Chains in PBF-Based Additive Manufacturing. In Bernd-Arno Behrens; Alexander Brosius; Wolfgang Hintze; Steffen Ihlenfeldt; Jens Peter Wulfsberg (Eds.), Production at the leading edge of technology. (pp. 368-377).
Sjarov, M., Lechler, T., Fuchs, J., Brossog, M., Selmaier, A., Faltus, F.,... Franke, J. (2020). The Digital Twin Concept in Industry – A Review and Systematization.
Stoll, T., Trautnitz, P., Schmiedeke, S., Franke, J., & Travitzky, N. (2020). Process development for laser powder bed fusion of pure copper. Proceedings of SPIE, Proceedings Volume 11271, Laser 3D Manufacturing VII; 112710I (2020). https://doi.org/10.1117/12.2563870
Teske, F., Fehrle, A., & Franke, J. (2020). Evaluation of the Sustainability of Decentralised Energy Systems for Domestic Applications. In Proceedings of the 2020 IEEE Electric Power and Energy Conference. Edmonton (Online), CA.
Thielen, N., Schmidt, K., Seidel, R., & Franke, J. (2020). Maschinelles Lernen in der Elektronikproduktion: Herausforderungen und Anwendungsmöglichkeiten. In VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM) (Hrg.), GMM-Fb. 94: EBL 2020 – Elektronische Baugruppen und Leiterplatten. Fellbach: VDE Verlag.
Thielen, N., Werner, D., Schmidt, K., Seidel, R., Reinhardt, A., & Franke, J. (2020). A Machine Learning Based Approach to Detect False Calls in SMT Manufacturing. In Proceedings of the International Spring Seminar on Electronics Technology. Demanovska Valley, SK: IEEE Computer Society.
Urban, N., Detrois, J., & Franke, J. (2020). Correlation between Residual Stress, Building Angle and Illumination Parameters of Additive Manufactured FeSi6.5 and Mechanical and Magnetic Properties. In 2020 10TH INTERNATIONAL ELECTRIC DRIVES PRODUCTION CONFERENCE (EDPC) (pp. 206-212). NEW YORK: IEEE.
Voigt, C., & Franke, J. (2020). Evaluation verschiedener Ansätze zur vollautomatisierten Montage von Weicheisenkernen auf Flachbaugruppen in traditionellen SMD-Linien. In EBL 2020 - Elektronische Baugruppen und Leiterplatten. Fellbach, DE: VDE.
Vukovic, P., Collischon, M., & Franke, J. (2020). Simulation software design as a potential solution to the increasing complexity of industrial communication networks. In Sotiris Makris (Eds.), Procedia CIRP (pp. 1-6). Athens, GR: Elsevier B.V..
Vukovic, P., & Franke, J. (2020). Kommunikationsbedürfnisse flexibler Produktionsanlagen. In VDI Berichte (pp. 843-852). Online: VDI Verlag GMBH.
Vukovic, P., Lechler, T., & Franke, J. (2020). A Concept for Wireless Network Integration in Production System Planning. In IEEE International Conference on Emerging Technologies and Factory Automation, ETFA (pp. 1095-1098). Vienna, AUT: Institute of Electrical and Electronics Engineers Inc..
Wagner, P., Hansch, G., Konrad, C., John, K.H., Bauer, J., & Franke, J. (2020). Applicability of Security Standards for Operational Technology by SMEs and Large Enterprises. In IEEE International Conference on Emerging Technologies and Factory Automation, ETFA (pp. 1544-1551). Vienna, AUT: Institute of Electrical and Electronics Engineers Inc..
Wang, L., Silva, L., Süß-Wolf, R., & Franke, J. (2020). Prediction of surface roughness of laser selective metallization of ceramics by multiple linear regression and artificial neural networks approaches. Journal of Laser Applications, 32(4). https://doi.org/10.2351/7.0000198
Weigelt, M., Thoma, C., Zheng, E., & Franke, J. (2020). Finite‑element‑analysis of the mechanical behavior of high‑frequency litz wire in flat coil winding. Production Engineering. https://doi.org/10.1007/s11740-020-00996-3
Yoo, I.S., Preis, A., & Franke, J. (2020). Development of a test bench for the urodynamic simulation of the lower urinary tract*. In IEEE (Eds.), 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC) (pp. 2337-2341). Montreal, QC, CA: Institute of Electrical and Electronics Engineers Inc..
Zwingel, M., Herbert, M., Lieret, M., Schuderer, P., & Franke, J. (2020). An Economic Solution for Localization of Autonomous Tow Trucks in a Mixed Indoor and Outdoor Environment Using a Node Based Approach. In Production at the leading edge of technology. (pp. 457-466). Springer, Berlin, Heidelberg.

Prof. Dr.-Ing. Jörg Franke

Office hours

Publications

2025

2024

2023

2022

2021

2020

News and Recent Accomplishments: